Bedienungsanleitung Panasonic SC-BTT362 (Seite 47 von 52) (Englisch)

452164

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Reference

VQT3M52

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio type.

≥ Check connections to speakers and other equipment.

(> 12s18)

≥ Ensure the speaker settings for your speakers are correct.

(> 43)

≥ To output audio from a device connected with an HDMI

cable, set “HDMI Audio Output” to “On” in the Setup menu.

(> 42)

≥ When “BD-Video Secondary Audio” is set to “On”, Dolby

TrueHD, Dolby Digital Plus, DTS-HD Master Audio and

DTS-HD High Resolution Audio are output as Dolby Digital

or DTS Digital Surround.

≥ Re-master will not work when the bitstream signal is output

from the HDMI AV OUT terminal. (> 39)

≥ Depending on the connected equipment, the sound may be

distorted if this unit is connected with an HDMI cable.

No surround sound effect.

≥ Press [SURROUND] to select a surround effect. (> 24)

Cannot switch audio.

≥ When audio is output from the HDMI AV OUT terminal, set

“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or

“MPEG Audio” to “PCM”. (> 40)

No sound from the TV.

≥ Press [EXT-IN] to select the corresponding source. (> 22)

≥ When connecting the unit to a TV using an HDMI cable,

check whether the HDMI terminal on the TV is labeled

“HDMI (ARC)”. If not labeled in this way, connect using the

HDMI cable in combination with an optical digital audio

cable.(> 14, 15)

≥ If there is no sound from the equipment connected to this

unit’s DIGITAL AUDIO IN terminal, please make sure that

the optical audio output of the equipment is set to PCM.

Cannot charge or operate.

≥ Check that the iPod/iPhone is connected firmly. (> 34)

≥ The battery of the iPod/iPhone is depleted. Charge the iPod/

iPhone, and then operate again.

≥ When unexpected operation occurs while using the

iPod/iPhone, connect the iPod/iPhone again or try to restart

the iPod/iPhone.

Cannot display iPod/iPhone videos/photos on the TV.

≥ Make sure that TV is connected to the VIDEO OUT terminal

on this unit. (> 14)

≥ Operate the iPod/iPhone menu to make the appropriate

video/photo output settings for your TV. (Refer to operating

instructions for your iPod/iPhone.)

The TV input channel unintentionally changes to HDMI

input.

≥ When the main unit is connected with an “HDAVI Control”

compatible TV and VIDEO IN is selected for iPod/iPhone

video or photo playback, the TV input channel will

automatically change to the HDMI input channel when

[HOME] is pressed.

jRe-select the TV’s VIDEO IN input channel.

Distorted sound or noise is heard.

≥ Adjust the position of the antenna.

≥ Use an outdoor antenna. (> 18)

A beat sound is heard.

≥ Try to keep a certain amount of distance between the

antenna and the TV.

I can’t connect to the network.

≥ Confirm the network connection and settings. (> 17, 20, 42)

≥ Check the operating instructions for each device and

connect accordingly.

[BTT362]

When using Wireless LAN connection, video or audio

from the DLNA Certified media server is played back

intermittently, not played back or video frames are

dropped during playback.

≥ Higher transfer rate router such as 802.11n (2.4 GHz or

5 GHz) Wireless router may solve the problem. If you use

802.11n (2.4 GHz or 5 GHz) Wireless router, it is necessary

to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc.

at 2.4 GHz may result in connection interruptions or other

problems.

≥ On the “Wireless Settings” screen (> 42), the continuous

lighting of at least 4 “Reception” indicators is the target for a

stable connection. If 3 or fewer indicators are lit or the

connection is being interrupted, change the position or angle

of your Wireless router and see if the connection state

improves. If there is no improvement, connect to a wired

network and perform the “Network Easy Setting” (> 20)

again.

BD-Video or DVD-Video is not played.

≥ Ensure the disc is for the correct BD-Video region code or

DVD-Video region number, and is not defective. (> 11)

≥ You have set a ratings level to limit BD-Video or DVD-Video

play. Change this setting. (> 40)

≥ Some BD-Video can only be output with HDMI.

I can’t play back BD-Live.

≥ The SD card is write-protected. (> 11)

≥ Confirm that this unit is connected to the broadband Internet.

(> 17)

≥ Confirm the “BD-Live Internet Access” settings. (> 40)

≥ Confirm an SD Card is inserted into the SD Card slot. (> 22)

Alternative soundtrack and subtitles cannot be selected.

≥ The languages are not recorded on the disc.

≥ You may not be able to use the playback menu to change the

soundtrack and subtitles on some discs. Use the disc’s

menus to make changes. (> 25)

Angle cannot be changed.

≥ Angles can only be changed during scenes where different

angles are recorded.

Sound

iPod/iPhone operation

Radio

Network

Other difficulties with playback

SCBTT362_262_EB_VQT3M52_eng.book 47 ページ２０１１年１月２５日　火曜日　午後８時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT362 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTT362

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info