Bedienungsanleitung Panasonic SC-BTT370 (Seite 22 von 56) (Englisch)

533593

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

VQT3M06

After completing “Easy setup”, you can perform “Network Easy

Setting”.

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to make your connection

settings.

≥ When you experience problems (> right)

∫ “Wireless” connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID

≥ If your wireless connection is encrypted please be sure

that you know your encryption key.

≥ [BTT270]

If “Wireless LAN Adaptor is not connected.” is displayed,

check that the Wireless LAN Adaptor is fully inserted.

Alternatively, disconnect and reconnect it. If there is still no

change in the display, consult your dealer for advice.

Select “WPS (PUSH button)” or “Search for

wireless network” and then follow the

on-screen instructions and make the settings.

WPS (PUSH button):

If your Wireless router supports WPS

(PUSH button), you can easily perform

the settings by pressing WPS button on it.

WPS (Wi-Fi Protected Setup) is a

standard that facilitates settings relating to

the connection and security of wireless

LAN devices.

1 Press WPS button or corresponding button of Wireless

router until the lamp starts flashing.

≥ For details, refer to the operating instruction of Wireless

router.

2 Press [OK].

Search for wireless network:

≥ When you select “Search for wireless network”, the available

wireless networks will be displayed. Select your network

name and press [OK].

– If your network name is not displayed search again by

pressing the red button on the remote control.

jStealth SSID will not be displayed when you select “Search

for wireless network”. Enter manually by using “Manual

setting”.

(Press [HOME] > select “Others”> select “Setup”> select

“Network” > [OK] > select “Network Settings” > [OK] >

select “Wireless Settings” > [OK] > select “Connection

Setting”> [OK]> select “Manual setting”> [OK])

≥ If your wireless network is encrypted, Encryption Key input

screen will be displayed.

Input the encryption key of your network.

An SSID (Service Set IDentification) is a name used by wireless LAN to

identify a particular network. Transmission is possible if the SSID matches

for both devices.

Wi-Fi Protected Setup-compatible Wireless router may have the mark.

Wireless Settings

Network Easy Setting

RETURN

Network Easy Setting

Wired

Wireless

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select "Wired."

Wireless LAN connection:

Select "Wireless."

e.g., [BTT775] [BTT770] [BTT370]

Wireless Settings

Select a connection method to wireless access point.

Please refer to the operating instructions of your wireless

access point about connection methods.

Search for wireless network

WPS (PUSH button)

e.g.,

When you experience

problems with settings

Display Check the following

A conflict with other

devices occurred.

≥ Please wait a few moments, and

then try again.

A time out error

occurred.

≥ Setting of the Wireless router for

MAC Address etc.

≥ The signal may be weak.

[BTT270]

Using the USB extension cable

supplied with the Wireless LAN

Adaptor, adjust the position of the

Wireless LAN Adaptor.

≥ The SSID and the encryption key

of the Wireless router.

≥ Please wait a few moments, and

then try again.

An authentication

error or a time out

error occurred.

A device error

occurred.

≥ [BTT270]

Connection of Wireless LAN

Adaptor

≥ If there is no improvement in

symptom, consult your dealer.

Wireless Settings

Failed to complete.

A conflict with another device occurred.

Do you want to configure wireless network connection

setting again ?

Yes No

SCBTT775_770_370_270EBEPGN_VQT3M06.book 22 ページ２０１１年１月１８日　火曜日　午後６時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT370 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTT370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info