Bedienungsanleitung Panasonic sc btt770 manual (Seite 43 von 52) (Englisch)

535522

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Reference

Optional speaker

settings

VQT3D27

Reference

Troubleshooting guide

Before requesting service, please perform the

following steps.

The following do not indicate a problem with this unit:

jRegular disc rotating sounds.

jImage disturbance during search.

jImage disturbance when replacing 3D discs.

∫ Unit does not respond to the remote

control or front panel buttons.

Press and hold [POWER Í/I] on the main unit for 5 seconds.

jIf still unable to power the unit off, disconnect the power cord,

wait 1 minute, then reconnect the power cord.

∫ Cannot eject disc.

The unit may have a problem.

While the unit is off, press and hold [9] on the remote

control and [< OPEN/CLOSE] on the unit at the same time for

more than 5 seconds.

To return to the factory preset

≥ Select “Yes” in “Restore Default Settings” in the Setup menu.

(> 40)

To return all settings to the factory preset

≥ Reset the unit as follows:

While the unit is off, press and hold [+ VOLUME], [< OPEN/

CLOSE] and [POWER Í/I] on the main unit at the same

time for more than 5 seconds.

The remote control doesn’t work properly.

≥ Change the batteries in the remote control. (> 9)

≥ The remote control and main unit are using different codes. If

“SET ” is displayed on the unit’s display when a button is

pressed on the remote control, change the code on the

remote control. (> 40)

Disc cannot be played.

≥ The disc is dirty. (> 9)

≥ Check the region code.

Still pictures (JPEG) do not playback normally.

≥ The images that were edited on the PC, such as Progressive

JPEG, etc., may not playback.

The TV tuner mode is not displayed when the TV is

switched on.

≥ This phenomenon may occur, depending on the TV setting,

when “Quick Start” is set to “On”.

≥ Depending on the TV, this phenomenon may be prevented

by reconnecting the HDMI cable to a different HDMI input

terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.

You want to cancel the ratings level.

The ratings level returns to the factory preset.

1 While the unit is on, press and hold [OK], [B] and [Y] on the

remote control at the same time for more than 5 seconds.

j“00 RET” is displayed on the unit’s display.

Repeatedly press [

] (right) on the remote control or

[POWER

/I] on the unit until “03 VL” is displayed on the

unit’s display.

3 Press [OK] on the remote control or [< OPEN/CLOSE] on

the unit.

This unit does not recognize the communication camera

correctly.

≥ Disconnect and reconnect the communication camera. If it

still does not recognize the connection, turn the power of this

unit off and on again.

No power.

≥ Insert the AC power supply cord securely into a household

AC outlet. (> 18)

The unit switches to standby mode.

≥ This unit will automatically turn to standby mode after 30

minutes if it is inactive. (> 7)

≥ When the time set for the sleep timer has passed, the power

will be turned off. (> 6)

≥ One of the unit’s safety devices is activated. Press

[POWER Í/I] on the main unit to turn the unit on.

This unit is turned off when the input for the TV is switched.

≥ This is a normal phenomenon when using VIERA Link

(HDAVI Control 4 or later). For details please read the

operating instructions for the TV.

The unit does not turn off.

Press and hold [POWER

/I] on the main unit for 5 seconds.

(If still unable to power the unit off, disconnect the power

cord, wait 1 minute, then reconnect the power cord.)

2 Reset the unit as follows:

While the unit is off, press and hold [+ VOLUME],

[< OPEN/CLOSE] and [POWER Í/I] on the main unit at

the same time for more than 5 seconds.

The display is dim.

≥ Change “Front Panel Display” in the Setup menu. (> 38)

Do you have the latest firmware installed?

Firmware updates may be released to correct operating

irregularities that are discovered with certain movies. (> 22)

Make the following checks and visit our

website for more information.

For U.S.A. :

http://www.panasonic.com/help

Enter the model number.

For Canada :

http://www.panasonic.ca

Or visit our website to find a service

center.

You can find a service center near you easily on our website.

Other support information:

“Customer Services Directory (United States and Puerto

Rico)” (> 50) or “Limited Warranty (Only for CANADA)”

(> 51)

General operation

Power

Displays

VQT3D27~Body_mst.fm 43 ページ２０１０年１２月２４日　金曜日　午後６時４８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc btt770 manual Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc btt770 manual

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info