Bedienungsanleitung Panasonic sc btx70 eg k (Seite 24 von 56) (Englisch)

371592

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT9479

Enjoying TV, etc. with this unit’s speakers

You can enjoy TV broadcasts with this unit’s speakers.

Preparation

Confirm the audio connection to the OPTICAL IN or AUX terminal on

the main unit. (> 9 to 10)

Turn on the TV.

1 Press [EXT-IN] several times to select

“

D-IN 1”

(DIGITAL IN 1)*

“

D-IN 2” (DIGITAL IN 2)*

“AUX”*

Main unit: Press [RADIO/EXT-IN].

≥D-IN 1 (DIGITAL IN 1)*

When connecting using OPTICAL 1(TV) terminal.

≥D-IN 2 (DIGITAL IN 2)*

When connecting using OPTICAL 2(STB) terminal.

≥AUX*

When connecting using AUX terminal.

*1 For connections with the TV.

*2 For connections with other devices.

≥When the system is connected to an HDAVI Control 2 or

later-compatible TV via an HDMI cable, TV broadcast audio is output

through the system speakers if the TV input is switched to TV tuner

mode. See “Setting the TV audio for VIERA Link “HDAVI Control”” on

page 25 for setting method.

≥Reduce the volume on the TV to its minimum, and then adjust the

volume of the main unit.

You can enhance stereo sources with surround sound effect.

Press [SURROUND] several times to select the mode.

≥You can also press [SURROUND] and then [3, 4] to select the

mode.

≥The selected effect will only be displayed on the main unit.

For more detailed information on this operation, please refer to the

“Enjoying surround sound effects” section on page 15.

You can adjust the mode depending on the source or situation.

1 Press [SOUND] several times to select the mode.

≥You can also press [SOUND] and then [3, 4] to select the

mode.

≥The selected effect will only be displayed on the main unit.

2 While the selected mode is displayed

Press [2, 1] and select the desired setting.

For more detailed information on this operation, please refer to the

“Changing the sound modes” section on page 15.

Select to suit the type of audio from the OPTICAL IN terminals on the

main unit.

≥Underlined items are the factory presets.

1 Press [EXT-IN] several times to select “D-IN 1”

(DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).

Main unit: Press [RADIO/EXT-IN].

Press [STATUS] several times to select the mode.

≥

You can also press [STATUS] and then [

] to select the mode.

≥The digital audio input settings are to be set separately to each

source, “D-IN 1” and “D-IN 2”.

≥The selected effect will only be displayed on the main unit.

3 While the selected mode is displayed

Press [2, 1] and select the desired setting.

*3 When “D-IN 1” is selected.

*4 When “D-IN 2” is selected.

*5 The device connected to the OPTICAL 2(STB) terminal must be

connected to the TV via an HDMI cable. If it is not connected via an

HDMI cable, “NOT CONDITIONAL” is displayed on the main unit.

Enjoying TV and other devices sound

from this unit’s speakers

Recommended modes to enjoy TV audio:

2.1 ch mode

≥DOLBY VIRTUAL SPEAKER REFERENCE

≥DOLBY VIRTUAL SPEAKER WIDE

4.1 ch/6.1 ch mode (> 42)

≥DOLBY PL II MOVIE

≥DOLBY PL II MUSIC

≥S.SURROUND

EXT-IN

SOUND

SURROUND

STATUS

EXT-IN

STATUS

SURROUND

SOUND

Adjusting the sound

Making settings for digital audio input

Available settings

Mode Setting

DUAL: (Only works with Dolby Dual Mono)

– MAIN

– SAP*

– M+S

* (stereo audio)

*“SAP” = Secondary Audio Program

≥If this is set to “MAIN” or to “SAP”, the PCM FIX

modes will automatically be set to “OFF”.

DRC:

(Dynamic

Range

Compression)

– ON

Adjust for clarity even when the volume is low by

compressing the range of the lowest sound level

and the highest sound level. Convenient for late

night viewing. (Only works with Dolby Digital)

– OFF

The full dynamic range of the signal is reproduced.

PCM FIX: – ON

Select when receiving only PCM signals.

– OFF

Select when receiving Dolby Digital and PCM

signals.

≥When receiving true 5.1-channel surround

sound, select “OFF”.

≥If this is set to “ON”, the DUAL mode will

automatically be set to “M+S”.

TV AUDIO*

– AUX

Select when receiving analogue sound from the

TV to the AUX terminal.

– D-IN 1

Select when receiving digital sound from the TV

to the OPTICAL 1(TV) terminal.

CABLE/SAT

AUDIO*

4, 5

– SET

Select when setting the main unit to switch to

“D-IN 2” when the input channel of an HDMI

connected STB is selected on the TV (B 25,

Setting the TV audio for VIERA Link “HDAVI

Control”).

– OFF

Select to cancel this setting.

≥Audio that is input through the OPTICAL DIGITAL IN or

AUX terminals are not output from the HDMI terminal.

NOTE

BTX70PP_eng.book 24 ページ２００９年６月２４日　水曜日　午後３時４２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc btx70 eg k Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc btx70 eg k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info