Bedienungsanleitung Panasonic sc btx70 eg k (Seite 42 von 56) (Englisch)

371592

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT9479

Wireless connections (optional)

By connecting 1 or 2 units of the optional Panasonic wireless system SH-FX70 with 2 or 4 additional speakers, it is possible to change this unit

into a 4.1 ch or 6.1 ch home theater system.

This system's surround sound effect settings will change (> 15) and it is possible to listen to the true, original surround audio signals of the

playback contents. (However, the center channel included in the audio source will be output from the front L R speakers.)

∫ Wireless setup diagram

e.g., 4.1ch e.g., 6.1ch

LS: Surround (left), RS: Surround (right)

≥Place behind the seating position, about 1 m (3 ft) higher than ear

level.

LS: Surround (left), RS: Surround (right)

≥Place on the side of the seating position.

LB: Surround back (left), RB: Surround back (right)

≥

Place behind the seating position, about 1 m (3 ft) higher than ear level.

∫ Digital transmitter

1 Push $ to open the digital transmitter door.

2 Insert fully until you hear a click.

∫ Wireless system

∫ AC power supply cord

Connecting the surround, surround back speakers and the optional wireless system

(SH-FX70)

LB RB

Main unit

(with the digital

transmitter)

Seating position

Surround speaker cables

Main unit

(with the digital

transmitter)

Seating position

Surround speaker cables

SH-FX70: 1 unit

SH-FX70: 2 units

Preparation

Additional speakers:

1 set

Additional speakers:

2 sets

≥Turn off all equipment before connection and read the appropriate operating instructions.

≥Connect the AC power supply cord after all other connections are complete.

≥Do not use the wireless system and digital transmitter in a metal cabinet or bookshelf.

≥Place the wireless system within approximately 15 m (47 ft) from the home theater unit.

NOTE

Connections

Do not insert or remove while the main unit is on.

SH-TR70 digital transmitter

Push!

SPEAKERS

ENCEINTES

LS / RB LB / RS

SURR

I/D SET

AC IN

SURROUND (3 – 6 )

AMBIOPHONIQUES

SIDE

SURR

SIDE

SURR

SIDE

Surround

selector

Connecting the speakers to the wireless system

Connect to terminals of the same color.

Insert fully.

Speaker cable

For 4.1ch connection

SURROUND (LS): Blue

SURROUND (RS): Grey

For 6.1ch connection

SURROUND (LS): Blue

SURROUND BACK (LB): Grey

SURROUND (RS): Grey

SURROUND BACK (RB): Blue

Selector setting for the

left and right speakers

Selector setting for the

left speakers

Selector setting for the

right speakers

Impedance: 3 ≠ to 6 ≠

Speaker input power: 100 W (Min)

AC power supply cord

(included with SH-FX70)

To household AC outlet

(AC 120 V, 60 Hz)

Optional speaker

settings

BTX70PP_eng.book 42 ページ２００９年６月２４日　水曜日　午後３時４２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc btx70 eg k Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc btx70 eg k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info