Bedienungsanleitung Panasonic sc btx70 eg k (Seite 46 von 56) (Englisch)

371592

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT9479

Troubleshooting guide

Sound Page

Card

iPod operations

Radio

Optional wireless system (SH-FX70)

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Turn the volume up.

≥Turn the muting off.

≥Check connections to speakers and other equipment.

≥Select the corresponding source.

≥Press [AUDIO] to select the audio.

≥Ensure the speaker settings for your speakers are correct.

≥

When “BD-Video Secondary Audio” is set to “On”, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master

Audio and DTS-HD High Resolution Audio are output as Dolby Digital or DTS Digital Surround.

≥Re-master will not work when a bitstream signal is output from the HDMI AV OUT terminal.

≥Audio may not be heard when more than 2 devices are connected with HDMI cables.

Reduce the number of connected devices.

≥To output audio to a device connected with an HDMI cable, set “HDMI Audio Output” to “On”

in the Setup menu.

≥Depending on the connected equipment, the sound may be distorted if this unit is connected

with an HDMI cable.

≥The multi-channel audio from a device connected to the TV is not output in it’s original

multi-channel form.

– If the device has an optical audio output terminal, connect the device to this unit’s

“OPTICAL 2(STB)” terminal.

8 to 11

—

10, 24

Humming is heard during play. ≥An AC power supply cord or fluorescent light is near the main unit. Keep other appliances and

cables away from the main unit.

—

No surround sound. ≥Press [SURROUND] to select a surround effect. 15

Cannot switch audio. ≥There are discs for which audio cannot be changed because of how the disc was created.

≥When audio is output from the HDMI AV OUT terminal, you cannot switch the audio if “Dolby

D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby D/Dolby D +/

Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.

—

No sound from the TV ≥Press [EXT-IN] to select the corresponding source. 14

The capacity of the SD card

decreased.

≥When a BD-Video that supports the BD-Live is used, and an SD card is in the slot, data may

be written to the SD card. Erase the data by using “BD-Video Data Erase”, format the card or

use a new card.

Music on an SD card cannot be

played.

≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data.

The contents of the card

cannot be read.

≥The card is not compatible or the contents on the card may be damaged.

≥Turn off and then turn on the unit again.

—

Cannot charge or operate. ≥Check that the iPod is connected firmly.

≥The battery of the iPod is depleted. Charge the iPod, and then operate again.

≥Check that there is nothing wrong with the iPod.

—

Cannot display iPod videos/

photos on the TV.

≥Make sure that TV is connected to the VIDEO OUT terminal on this unit.

≥Operate the iPod menu to make the appropriate video/photo output settings for your TV.

(Refer to operating instructions for your iPod.)

—

The TV input channel

unintentionally changes to

HDMI input.

≥When the main unit is connected with an

“

HDAVI Control

” compatible TV and VIDEO IN is

selected for iPod video or photo playback, the TV input channel will automatically change to

the HDMI input channel when [START] is pressed.

– Re-select the TV’s VIDEO IN input channel.

—

Distorted sound or noise is

heard. “ST” flickers or does not

light.

≥Adjust the position of the FM antenna.

≥Use an outdoor antenna.

—

A beat sound is heard. ≥Turn the TV off or move it away from the unit. —

No power. ≥Ensure the AC power supply cord of the wireless system is connected properly. —

The indicator on the wireless

system does not turn green

even though [I/D SET] is

pressed and pairing completed.

≥Turn the wireless system off and then back on.

—

The wireless link indicator

(e.g., “ [W1] ” or an indicator) is

flashing.

≥There is no link between the main unit and the wireless system. Turn the wireless system off

and then back on. Alternatively, turn the wireless system off, disconnect the AC power supply

cord, and then reconnect it.

—

The wireless link indicator

(e.g., “ [W1] ” or an indicator)

does not light.

≥Check that the main unit is turned on, and the wireless system is turned on.

≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.

≥Ensure the surround sound setting on the main unit.

—

The wireless link indicator

keeps flashing between red

and green.

≥There is a power supply problem. Consult the dealer.

—

Reference

BTX70PP_eng.book 46 ページ２００９年６月２４日　水曜日　午後３時４２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc btx70 eg k Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc btx70 eg k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info