Bedienungsanleitung Panasonic SC-BTX77 (Seite 16 von 56) (Englisch)

533275

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

VQT2Q72

Playback

Basic operation

Instructions for operations are generally described using the remote control in these operating instructions.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í] to turn on the unit.

2 Insert the media (D above).

Play starts.

≥If the media with data in different file formats is inserted, the file

selection menu is displayed. Press [3, 4] to select the desired

file format and press [OK].

≥If the menu is displayed, press [3, 4, 2, 1] to select the item

and press [OK].

≥If the screen prompting you to use the colour buttons appears,

continue to operate with the colour buttons on the remote control.

≥If play does not start, press [1PLAY].

≥When [1PLAY] is pressed with the sliding door open to either

side, the sliding door will close. If a disc is inserted, playback will

start.

Stop

Play

Pause

,VOLUME

Skip/Search/Slow-motion

BD/SD, iPod

RADIO/EXT IN

RADIO/EXT-IN

Label facing

1) Press [DISC < OPEN/CLOSE] to open the sliding door.

2) Place the disc onto the spindle in the centre and then push the disc down until it clicks into place.

≥When inserting or removing a disc, tilt the disc so as not to touch the sliding door.

Inserting or removing an SD card

1) Push $ to open the SD card/USB

door.

2) Insert the SD card into the SD card

slot.

To remove the card, press on the centre

of the card and pull it straight out.

≥Press [DISC < OPEN/CLOSE] again to close the sliding door.

≥To remove the disc, while pressing down on the spindle, grasp the edge of the disc and gently lift it out.

≥DVD-RAM: Remove discs from their cartridges before use.

≥Insert double-sided discs so the label for the side you want to play is facing up.

Insert the card with

the cut-off corner on

the left.

≥Press on the

centre of the

card until it clicks

into place.

nserting or removing a disc

Inserting or removing a USB device

1) Push $ to open the SD card/USB door.

2) Insert the USB device into the USB port.

≥Before inserting any USB device to this unit, ensure that the data stored therein has

been backed up.

≥Check the orientation of the USB connector and insert it straight in.

≥Some USB devices inserted into this unit may cause this unit to stop operating. Such

USB devices cannot be used on this unit.

About the use of USB device

Since the physical size of USB device can vary, please consider its width when

connecting any USB device to this unit.

≥

If the USB device does not fit, we recommend using a USB extension cable (not included)

≥When connecting a USB device using a USB extention cable make sure not to tangle

the cable round the SD card/USB door.

The SD card/USB door may get damaged.

To remove the USB device, complete all USB device-related

operations and pull the USB device straight out.

≥Disc playback will stop and the sliding door will open if [iPod < OPEN/CLOSE] is pressed twice during disc playback.

–The resume play function may operate with some discs.

≥Be sure to press [DISC < OPEN/CLOSE] to open and close the sliding door. Forcing the sliding door open or close, will

damage the unit.

≥Keep your fingers away from the sliding door when it is moving to avoid minor injuries.

≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output as “NTSC” or “PAL60”. You can select “NTSC” or

“PAL60” in “NTSC Contents Output” for NTSC discs. (> 35)

≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you finish to preserve the unit’s

motor and your television screen.

≥If a media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.

≥The producers of the disc can control how discs are played. So you may not always be able to control play as described in

these operating instructions. Read the disc’s instructions carefully.

≥

When playing a set of two or more BD-Video discs, the menu screen may continue to display even if the disc has been ejected.

To display menus

[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX]

Press [TOP MENU/DIRECT NAVIGATOR].

To show Pop-up menu

[BD-V]

The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating

method, refer to the instructions for the disc.

1) Press [POP-UP MENU].

2) Press [3, 4, 2, 1] to select the item and press [OK].

≥Pop-up menu also appears by pressing [OPTION] and selecting “Pop-up Menu”.

≥Press [POP-UP MENU] to exit the screen.

≥It may take time to read BD-Video discs that include BD-J (> 51).

NOTE

TIPS

VQT2Q72~Body_mst.fm 16 ページ２０１０年２月２日　火曜日　午後２時３０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTX77 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTX77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info