Bedienungsanleitung Panasonic SC-BTX77 (Seite 25 von 56) (Englisch)

533275

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

VQT2Q72

Enjoying TV, etc. with this unit’s speakers

You can enjoy TV broadcasts with this unit’s speakers.

Preparation

Confirm the audio connection to the OPTICAL IN or AUX terminal

on this unit (> 9 to 10).

Turn on the TV.

1 Press [EXT-IN] several times to select “D-IN 1”

(DIGITAL IN 1)*

, “D-IN 2” (DIGITAL IN 2)*

“AUX”*

This unit: Press [RADIO/EXT-IN].

≥D-IN 1 (DIGITAL IN 1)*

When connecting using OPTICAL 1(TV) terminal.

≥D-IN 2 (DIGITAL IN 2)

When connecting using OPTICAL 2(STB) terminal.

≥AUX

When connecting using AUX terminal.

*1 For connections with the TV.

*2 For connections with other devices.

≥When the system is connected to an HDAVI Control 2 or

later-compatible TV via an HDMI cable, TV broadcast audio is

output through the system speakers if the TV input is switched to

TV tuner mode. See “Setting the TV audio for VIERA Link

“HDAVI Control”” on page 26 for setting method.

≥Reduce the volume on the TV to its minimum, and then adjust

the volume of this unit.

You can adjust the mode depending on the source or situation.

1 Press [SOUND] several times to select the mode.

≥You can also press [SOUND] and then [3, 4] to select the

mode.

≥The selected effect will only be displayed on the main unit.

2 While the selected mode is displayed

Press [2, 1] and select the desired setting.

For more detailed information on this operation, please refer to

the “Changing the sound modes” section on page 15.

Select to suit the type of audio from the OPTICAL IN terminals on

the main unit.

≥Underlined items are the factory presets.

1 Press [EXT-IN] several times to select “D-IN 1”

(DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).

Main unit: Press [RADIO/EXT-IN].

2 Press [STATUS] several times to select the mode.

≥You can also press [STATUS] and then [3, 4] to select the

mode.

≥The digital audio input settings are to be set separately to

each source, “D-IN 1” and “D-IN 2”.

≥The selected effect will only be displayed on the main unit.

3 While the selected mode is displayed

Press [2, 1] and select the desired setting.

*3 When “D-IN 1” is selected.

*4 When “D-IN 2” is selected.

*5 The device connected to the OPTICAL 2(STB) terminal must be

connected to the TV via an HDMI cable. If it is not connected via an

HDMI cable, “NOT CONDITIONAL” is displayed on the main unit.

Adjusting the sound

EXT-IN

SOUND

SURROUND

STATUS

EXT-IN

STATUS

SURROUND

SOUND

Making settings for digital audio input

Available settings

Mode Setting

DUAL: (Only works with Dolby Dual Mono)

–M1

–M2

–M1+M2 (stereo audio)

≥If this is set to “M1” or to “M2”, the PCM FIX

modes will automatically be set to “OFF”.

DRC:

(Dynamic

Range

Compression)

–ON

Adjust for clarity even when the volume is low

by compressing the range of the lowest sound

level and the highest sound level. Convenient

for late night viewing. (Only works with Dolby

Digital)

–OFF

The full dynamic range of the signal is

reproduced.

PCM FIX: –ON

Select when receiving only PCM signals.

–OFF

Select when receiving Dolby Digital and PCM

signals.

≥When receiving true 5.1-channel surround

sound, select “OFF”.

≥If this is set to “ON”, the DUAL mode will

automatically be set to “M1+M2”.

TV AUDIO*

: –AUX

Select when receiving analogue sound from

the TV to the AUX terminal.

–D-IN 1

Select when receiving digital sound from the

TV to the OPTICAL 1(TV) terminal.

CABLE/SAT

AUDIO*

4, 5

–SET

Select when setting the main unit to switch to

“D-IN 2” when the input channel of a HDMI

connected STB is selected on the TV (B 26,

Setting the TV audio for VIERA Link “HDAVI

Control”).

–OFF

Select to cancel this setting.

≥Audio that is input through the OPTICAL DIGITAL IN

or AUX terminals are not output from the HDMI

terminal.

NOTE

Radio

SC-BTX77&75EGEB-VQT2Q72_eng.book 25 ページ２０１０年１月６日　水曜日　午後７時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTX77 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTX77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info