Bedienungsanleitung Panasonic SC-BTX77 (Seite 36 von 56) (Englisch)

533275

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

VQT2Q72

Changing the unit’s settings

To select these settings, perform steps 1 – 5 (> 35)

“Sound”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

Change the dynamic range (> 51) for late night viewing.

≥On ≥Off

≥Auto: Effective only when Dolby TrueHD is played.

Digital Audio Output

≥Press [OK] to show the following settings.

Dolby D/Dolby D +/

Dolby TrueHD

Select whether Dolby Digital, Dolby

Digital Plus, Dolby TrueHD, DTS

Digital Surround, DTS-HD High

Resolution Audio or DTS-HD

Master Audio is output in

“Bitstream” or “PCM” format.

≥Not making the proper settings

may result in noise.

≥If the unit is connected with the

HDMI AV OUT terminal, the

specifications of the connected

equipment take preference over

this unit and audio selected in

these items may not be output

(e.g., when a television is

connected, the HDMI audio

output of this unit is limited to

down-mixed 2ch.)

≥Bitstream

Select “Bitstream” when the connected equipment can decode the

respective audio format.

–Connect equipment supporting HDMI (High Bit rate Audio) and

use a High Speed HDMI Cable in order to output high bit rate

audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High

Resolution Audio or DTS-HD Master Audio.

≥PCM:

Select “PCM” when the connected equipment cannot decode the

respective audio format.

Refer to the operating instructions for connected devices to verify

whether or not they can decode each of the audio formats.

DTS/DTS-HD

MPEG Audio ≥Bitstream: When connected to equipment with a built-in MPEG

decoder.

≥PCM

: When connected to equipment without a built-in MPEG

decoder.

BD-Video Secondary Audio

[BD-V]

Turn on/off the clicking sound on the menu and audio with

secondary video in picture-in-picture mode. (> 19)

≥On: The primary audio and secondary audio are mixed and

output. The sampling frequency is converted to 48 kHz.

≥Off

: The clicking sound on the menu and secondary audio

are not output.

PCM Down Conversion

Select how to output audio with a sampling frequency of

96 kHz or more.

≥Signals are converted to 48 kHz despite the settings across

in the following cases:

– when the signals have a sampling frequency of over 192 kHz

–when the disc has copy protection

–when “BD-Video Secondary Audio” is set to “On”

≥On: Signals are converted to 48 kHz. (Choose when the

connected equipment cannot process signals with

sampling frequency of 96 kHz.)

≥Off: Signals are output as 96 kHz. (Choose when the

connected equipment can process signals with

sampling frequency of 96 kHz.)

Downmix

Switch the downmix system for playing back multi-channel

surround sound.

≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”

is set to “Bitstream”, there are no downmix effects for the

outputted audio.

≥

The audio will be outputted in “Stereo” in the following cases.

–AVCHD playback

–Playback of clicking sound on the menu and audio with

secondary video in picture-in-picture mode

≥Stereo

: When connected to equipment that does not support

the virtual surround function.

≥Surround encoded:

When connected to equipment that supports the

conversion from 2 channels to multi channel surround.

High Clarity Sound

When the analog video terminal is not being used, the

electrical current that flows through the analogue video circuit

can be stopped. This prevents adverse effects on the audio

signals and produces clearer sound.

≥This works only when “BD/DVD”, “SD” or “USB”is selected

as the source.

≥Set to “Enable” and then set “High Clarity Sound” on the

on-screen menu to “On”. (> 34)

≥

Use this when outputting image via HDMI AV OUT terminal.

Analogue image will not be output via the VIDEO OUT terminal.

≥Enable ≥Disable

Speaker Refer to page 39

“Display”

On-Screen Messages

Choose whether to show status messages automatically.

≥Automatic ≥Off

On-Screen Language

Choose the language for these menus and on-screen messages.

≥English ≥Français ≥Español

≥Deutsch ≥Italiano ≥Nederlands ≥РУССКИЙ

Screen Saver Function

This is to prevent burn-in on the screen.

≥When this is set to “On”, the masked-off area on the screen

becomes grey.

[Only when connecting with an HDMI cable and “HDMI Video

Format” (

37) is set to any other mode than “576p/480p”]

≥On:

If there is no operation for 5 minutes or more, the displayed screen

switches to the other states automatically.

–When the Direct Navigator or START menu is displayed, the

display returns to the screen saver mode.

–When CD or MP3 is played, the display returns to the screen saver

mode. (Playback continues.)

–When still pictures are shown (except for slideshow), the display

returns to the Direct Navigator screen.

≥Off

FL Display

Changes the brightness of the unit’s display.

≥Bright

≥Dim: The display is dimmed.

≥Automatic: The display is dimmed, but brightens when you perform

some operations.

Software Licence Information about the software used by this unit is displayed.

SC-BTX77&75EGEB-VQT2Q72_eng.book 36 ページ２０１０年１月１８日　月曜日　午後５時５３分

Panasonic SC-BTX77 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTX77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info