Bedienungsanleitung Panasonic SC-BTX77 (Seite 48 von 56) (Englisch)

533275

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

VQT2Q72

Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.

On the television Page

Authorisation Error.

This unit is not authorised to

play this title.

≥

[DivX] You are trying to play the DivX VOD content that was purchased with a different

registration code. You cannot play the content on this unit.

Cannot play. ≥You inserted an incompatible disc. 40 – 43

Cannot play on this unit. ≥You tried to play a non-compatible image. 40 – 43

No disc is inserted. ≥The disc may be upside down. —

Rental Expired. ≥

[DivX] The DivX VOD content has zero remaining plays. You cannot play it. 20

$ This operation is not

available.

≥Some operations are unsupported by the unit. For example;

–

[BD-V]

During play back, reverse slow-motion or reverse frame-by-frame is not possible.

—

$ This operation is

prohibited by this disc.

≥Depending on the disc, you may not be able to perform search or skip when film

previews and warning screens are being played back.

—

Cannot connect.

Please check the connection

of the LAN cable. [BTX77]

≥When a hub is used but its Link lamp does not light up, check the cable connection,

LAN terminal connection, cable itself (a cross cable may be used by mistake), etc.

IP address is not set. [BTX77] ≥The “IP Address” in “IP Address / DNS Settings” is “---. ---. ---. ---“. Set the “IP

Address”, “Subnet Mask”, and “Gateway Address“. (Select the automatic address

acquisition if necessary.)

Cannot obtain IP address.

Please check the connection

or setting of the router. [BTX77]

≥If you use a hub, then check the connection between the hub and the router.

– Use the UPLINK port of the hub to connect to a router.

– Check whether or not the hub’s Link lamp lights up. If it does not light up, then check

the cable connection, LAN terminal connection, cable itself (a cross cable may be

used by mistake), etc.

≥If the above conditions are OK, then the router may not operate in DHCP mode. Check

the router settings and operation. You may reset the router to restore it to normal.

This IP address is already in

use.

Please check the setting.

[BTX77]

≥This unit’s IP address is used by another device. Check the IP addresses of this unit,

personal computers, and routers, etc. If necessary, reconfigure them to avoid IP

addresses from being duplicated.

—

Connection test could not be

conducted. [BTX77]

≥Turn the unit off. Remove the AC mains lead and reconnect it and try again. If the

same symptom persists, then consult your dealer.

—

IP address is not set correctly.

[BTX77]

Connection test was

unsuccessful. No reply from

Gateway. Please check the

connection or setting of the

router. [BTX77]

≥If you use a hub, then check the connection between the hub and the router.

– Use the UPLINK port of the hub to connect to a router.

– If the hub’s Link lamp does not light up, then check the cable connection, LAN

terminal connection, cable itself (a cross cable may be used by mistake), etc.

≥Check the “IP Address”, “Subnet Mask”, and “Gateway Address” in the “IP Address /

DNS Settings”.

≥If the MAC address information is required, then press [SETUP] to display the

“Network Settings” menu.

Network connection was

rejected.

Please confirm Setup “BD-Live

Internet Access”.

[BTX77]

≥When you set “BD-Live Internet Access” to “Limit” and play BD-Live contents which do

not have a content owner certificate, the Internet access of the content is not allowed.

If you allow the content to connect to Internet, set “BD-Live Internet Access” to

“Permit”.

Could not check for latest

firmware version.

Please try again later. [BTX77]

≥The firmware download server is currently unavailable. Please try again later.

—

High Clarity Sound is effective.

Analog video output is turned off

when playback starts.

≥“High Clarity Sound” in setup menu is set to “Enable”, and “High Clarity Sound” in

on-screen menu is set to “On”.

34, 36

No Video ≥Depending on the connected iPod, video menu may not be available on the TV. Select

the iPod menu (iPod LCD) mode and operate video playback from your iPod menu.

SC-BTX77&75EGEB-VQT2Q72_eng.book 48 ページ２０１０年１月６日　水曜日　午後７時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTX77 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTX77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info