Bedienungsanleitung Panasonic sc dp 1 (Seite 35 von 36) (Englisch)

370467

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT6817

Reference

Sound

Picture

Unit displays

Television displays

No sound.

Distorted sound.

≥Check the connections.

≥Turn the volume up.

≥Turn muting off.

≥Turn Advanced surround off if it causes distortion.

≥Switch off the unit, determine and correct the cause, then switch the unit on.

Causes include:

–Shorting (bare wires touching) of positive and negative speaker wires.

–Using speakers with an impedance lower than that rated for this unit.

–Straining of the speakers through excessive volume or power.

–Using the unit in a hot environment without proper ventilation.

—

Piercing noise comes from the

speakers.

≥If you have connected this unit to other equipment through the OPTICAL OUT terminal, ensure

you have selected the correct settings for “Dolby Digital”, “DTS Digital Surround” and “MPEG

”

in the SETUP menus’ Audio menu.

Only for the United Kingdom, Continental Europe, Russia, Australia and N.Z.

Effects do not work.

≥

Dialogue enhancer and Advanced surround do not work when the unit is outputting bitstream signals.

≥Advanced surround does not work if you have changed the play speed.

—

Picture distorted. ≥Some distortion is normal during SEARCH. —

No picture. ≥Check the connection.

≥Make sure the television is on.

≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct.

—

The picture shown on the

television is not normal.

(The sides of the picture are cut

off, the picture is stretched

horizontally, or black bands

appear at the top and bottom of

the screen.)

≥Go to Video in the SETUP menus, and change “TV Aspect” to suit your television.

≥Use the television to change the aspect to the correct one.

[For\Australia,\N.Z.\and\Southeast\Asia]

If your television cannot change the aspect when input is progressive, try changing 4:3

Aspect with the GUI screen.

≥Ensure that the unit is connected directly to the television, and is not connected through a video

cassette recorder.

≥Change the size with the variable zoom function.

[For\Australia,\N.Z.\and\Southeast\Asia]

≥Connect to the component video (480P) input terminals on a television compatible with this

unit’s copy guard system. You cannot view progressive video if your television is not compatible.

—

[For\Australia,\N.Z.\and\Southeast\Asia]

There is ghosting when

progressive output is on.

≥Change “Video output mode” to “480I” so “PROGRESSIVE” on the display goes out. This

problem is caused by the editing method or material used on DVD-Video, but should be

corrected if you use interlace output.

Picture quality is poor. ≥Check the settings in the GUI screen’s Picture Menu. 25

The picture on the television

disappears or stripes appear on

the screen.

≥The location and orientation of the antenna are incorrect. If you are using an indoor antenna,

change to an outdoor antenna.

≥The television antenna wire is too close to the unit. Separate the antenna wire of the television

from the unit.

—

Menus not displayed correctly. ≥Change the zoom ratio to “k1.00”.

≥With the GUI screen, change “Subtitle Position” to “0”.

[For\Australia,\N.Z.\and\Southeast\Asia]

≥With the GUI screen, change “4:3 Aspect” to “Normal”.

The display is dark. ≥Press and hold [SHIFT]i[DISPLAY] until the display returns to the original brightness. 28

“DVD NO PLAY” ≥You inserted a disc the unit cannot play; insert one it can.

≥You inserted a blank DVD-RAM.

—

“DVD NO DISC” ≥You haven’t inserted a disc; insert one.

≥You haven’t inserted the disc correctly; insert it correctly.

—

“F61” ≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

“DVD U11” ≥Disc is dirty. Wipe it clean. 5

“ERROR” ≥Incorrect operation performed. Read the instructions and try again. —

“DVD H∑∑”

∑∑ stands for a number.

≥Trouble may have occurred. The number following “H” depends on the status of the unit.

Reset procedure:

Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í]

to switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.

≥If the service numbers fail to clear, note the service number and contact a qualified service

person.

—

“Cannot display group xx,

picture xx”

≥You are trying to display incompatible pictures. —

[For\Australia,\N.Z.\and\Southeast\Asia]

“The progressive out is set to

“Disable””

≥Go to Video in the SETUP menus, and select “Enable” in “Progressive Out (Component)”. 30

No on-screen display. ≥Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”. 30

GUI screens not displayed or

only partially displayed on the

television.

≥Press [3, 4] while the rightmost icon is highlighted to move them down. 23

The disc’s menu is displayed in a

different language.

≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”. 30

6817b-p26-36.fm 35 ページ２００３年７月４日　金曜日　午後６時１８分

Panasonic sc dp 1 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc dp 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info