Bedienungsanleitung Panasonic SC-EN 35 (Seite 5 von 8) (Englisch)

64486

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

USB operations

The USB connectivity enables you to connect and play MP3 tracks from USB mass

storage class. Typically, USB memory devices (Bulk only transfer).

Preparation

Before connecting any USB mass storage device to the unit, ensure that the data

stored therein has been backed up.

It is not recommended to use a USB extension cable. The device connected via the

cable will not be recognised by this unit.

 Reduce the volume and connect the USB mass storage device.

 Press [USB q/h] to start play.

To pause play

Press [USB q/h].

Press again to resume play.

To stop play

Press [g].

“RESUME” is displayed. The position is memorized.

Press [USB q/h] to resume play.

Press [g] again to clear the position.

To skip track

Press [2/u] or [1/i].

To skip album Press [ALBUM or ] in the play mode.

Press [ALBUM or ] once and then the numbered

buttons in the stop mode.

Direct access play

(Play starts with the

track you select.)

 Press [ALBUM or ] to select the album.

 Press [1/i] once and then press the numbered buttons

select the desired track.

g Display function

Press [DISPLAY] repeatedly during play or pause.

Elapsed time Remaining time Album name Track name

ID3 (Artist) ID3 (Track) ID3 (Album)

For other operating functions, they are similar as those described in “Discs Operations”

(➡ page 3 and 4).

To remove the USB mass storage device

Select a source other than “USB”.

Removing the USB mass storage device with it selected as a source can damage the

data stored in the device.

Program type displays

NEWS News

AFFAIRS Current affairs

INFO Information

SPORT Sport

EDUCATE Education

DRAMA Drama

CULTURE Culture

SCIENCE Science

VARIED Varied

POP M Pop music

ROCK M Rock music

M.O.R.M Middle of the road Music

LIGHT M Light classical

CLASSICS Serious classical

OTHER M Other music

WEATHER Weather information

FINANCE Finance

CHILDREN Children

SOCIAL A Social affairs

RELIGION Religion

PHONE IN Phone in

TRAVEL Travel

LEISURE Leisure

JAZZ Jazz music

COUNTRY Country music

NATIONAL National music

OLDIES Oldies

FOLK M Folk music

DOCUMENT Documentary

TEST Test broadcast

ALARM Emergency announcement

g Compatible device

Devices which are deﬁned as USB mass storage class:

USB devices that support bulk only transfer.

USB devices that support USB 2.0 full speed.

g Supported Format

Files must have the extension “.mp3” or “.MP3”.

CBI (Control/Bulk/Interrupt) is not supported.

A device using NTFS ﬁle system is not supported [Only FAT 16/32 (File Allocation

Table 16/32) ﬁle system is supported].

Depending on the sector size, some ﬁles may not work.

This unit can access up to 255 albums and 2500 tracks.

The maximum number of tracks in a folder are 999 tracks.

Only one memory card will be selected when connecting a multiport USB card

reader. Typically the ﬁrst memory card inse

rted.

Disconnect the USB card reader from the unit when you remove the memory

card. Failure to do so may cause malfunction to the device.

When you connect your digital audio player to the USB jack, it charges all the time

except in standby mode.

•

RDS broadcasts

Enable you to display the name of a broadcasting station or a program type.

“RDS” lights while RDS signals are being received.

Press [DISPLAY] to display.

Station Name (PS) Program Type (PTY)

Frequency display

RDS displays may not be available if reception is poor.

SC-EN35

For continental Europe

Note

➡

Page 2 for the position of

remote control buttons.

USB enabled device

(not included)

MP3

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to

operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

 Press [FM/AM/MUSIC P.] to select “AM”. ( )

 (While pressing and hold [FM/AM/MUSIC P.] / [MUSIC

PORT] on the main unit)

Press and hold [2] until “REMOTE 2” appears on the main unit display.

 Press and hold [ENTER] and [2] for at least 2 seconds.

The main unit and remote control are now set to operate in “REMOTE 2” mode.

To return to “REMOTE 1” mode

Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3.

Perform steps 2 and 3 above but use [1] instead of [2] for both steps.

(“REMOTE 1” appears on the main unit during step 2.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit when you operate the remote

control.*

* If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.

SC-EN35 SC-EN33

Changing the main unit and remote control

mode

SC-EN35

SC-EN33

SC-EN35 E,GN,GCS PP.indd 5 22/03/2007 17:17:41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-EN 35 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-EN 35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info