Bedienungsanleitung Panasonic SC-EN36 (Seite 7 von 40) (Spanisch, Polnisch)

68292

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

RQTX0142

You can preset up to 30 FM channels and up to 15 AM channels.

Preparation: Press [FM/AM] to select “FM” or “AM”.

Automatic presetting

Press and hold [PGM, -AUTO PRESET] to start presetting.

Manual presetting

 Press [PLAY MODE] to select “MANUAL”.

 Press [u, 2] or [i, 1] to tune to the required station.

 Press [PGM, -AUTO PRESET].

 Press the numbered buttons to select a channel.

The station occupying a channel is erased if another station is preset in

that channel.

 Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

Press the numbered buttons to select the channel.

For channels 10 to 30 press [

≧

10], then the two digits.

 Press [PLAY MODE] to select “PRESET”.

 Press [u, 2] or [i, 1] to select the channel.

 Press [FM/AM] to select “FM” or “AM”.

 Press [PLAY MODE] to select “MANUAL”.

 Press [u, 2] or [i, 1] to select the frequency of the required

station.

To tune automatically

 Press [FM/AM] to select “FM” or “AM”.

 Press [PLAY MODE] to select “MANUAL”.

 Press and hold [u, 2] or [i, 1] until the frequency starts

changing rapidly.

Auto tuning stops when it finds a station.

To cancel auto tuning, press [u, 2] or [i, 1] once again.

Auto tuning may not function when there is excessive interference.

•

Manual tuning

Memory preset

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can

switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

 (While pressing and holding [MUSIC P.] on the main unit)

Press and hold [2] until “REMOTE 2” appears on the main unit

display.

 Press and hold [ENTER] and [2] for at least 2 seconds.

The main unit and remote control are now set to operate in “REMOTE

2” mode.

Digital remaster is effective on CD (MP3)

Analog remaster is effective on Music Port

This feature reproduces the frequencies lost during recording to give you

a sound closer to the original.

Press [REMASTER] during play to select “RE-MASTER ON”.

Each time you press the button:•

The SLEEP timer can turn the unit off after a set time.

Press [SLEEP] to turn the SLEEP function on/off.

Each time you press the button:

OFF (Canceled)

g To check the remaining time

Press [SLEEP] once

The play timer and sleep timer can be used together. The sleep timer

always has priority. Be sure not to overlap timer settings.

•

You can set the timer to come on at a certain time to wake you up.

Preparation:

Turn the unit on and set the clock.

Prepare the music source (disc, radio or music port) and set the

volume.

 Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY Original display

 Within 5 seconds, press [u, 2] or [i, 1]

to set the starting time.

 Press [CLOCK/TIMER] to confirm.

 Repeat steps 2 and 3 to set the finishing

time.

To activate the timer

 Press [zPLAY] to turn on the timer.

 Press [^] to turn off the unit.

To Action

Change the settings Repeat steps 1 to 4 and 6.

Change the source or volume

 Press [zPLAY] to clear zPLAY

indicator from the display.

 Make changes to the source or

volume.

 Perform steps 5 and 6.

Check the settings (when the

unit is on or in standby mode)

Press [CLOCK/TIMER] repeatedly to

select zPLAY.

Cancel

Press [zPLAY] to clear the timer

indicator from the display.

•

Sleep timer

Play timer

30MIN 60MIN 90MIN 120MIN

Note

The timer will start at the preset time, with the volume increasing

gradually to the preset level.

The timer comes on at the set time every day if the timer is on.

The unit must be in the standby mode for the timer to function.

If you turn the unit off and on again while the timer is functioning, the

finish time setting will not be activated.

When music port is selected as the source when the timer comes on,

the system turns on and engages music port as the source. If you wish

to playback from the portable audio equipment, activate the equipment’s

play mode and increase the volume. (See the portable audio equipment’s

instruction manual.)

•

This is a 24-hour clock.

 Press [CLOCK/TIMER] to set the clock.

 Press [u, 2] or [i, 1] to select the time within 5 seconds.

(Press and hold to change the time faster.)

 Press [CLOCK/TIMER] again.

g To display the clock when the unit

is on

Press [CLOCK/TIMER]

The clock is accurate to within ±60 seconds a month. Readjust if

necessary.

Set again after disconnecting the AC mains lead or power failure.

•

Setting the time

Changing the main unit and remote control mode

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both steps.

(“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are

different.

“REMOTE 1” or “REMOTE 2” appears on the main unit when you operate

the remote control.*

* If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2

seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2

seconds.

Timer

Note

➡ Page 3 for the buttons position of remote control and main unit.

SC-EN36_En,Sp,Cz,Po (RQTX0142-1E)_B5.indb 7 2/27/2008 6:56:44 PM

Panasonic SC-EN36 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-EN36

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info