Bedienungsanleitung Panasonic SC-EN36 (Seite 7 von 12) (Englisch)

68292

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RQTX0143

 Press [FM/AM] to select “FM” or “AM”.

 Press [PLAY MODE] to select “MANUAL”.

 Press [u, 2] or [i, 1] to select the frequency of the required

station.

To tune automatically

 Press [FM/AM] to select “FM” or “AM”.

 Press [PLAY MODE] to select “MANUAL”.

 Press and hold [u, 2] or [i, 1] until the frequency starts

changing rapidly.

Auto tuning stops when it finds a station.

To cancel auto tuning, press [u, 2] or [i, 1] once again.

Auto tuning may not function when there is excessive interference.

•

Manual tuning

The unit can play MP3, a method of compressing audio without overly

hurting audio quality.

When creating MP3 files to play on this unit

Maximum number of tracks and albums: 999 tracks and 256 albums.

Compatible compression rate: Between 64 kbps and 320 kbps (stereo).

128 kbps (stereo) is recommended.

Disc formats: ISO9660 level 1 and level 2 (except for extended formats).

The time for reading TOC depends on the number of the tracks, the

folders or folder structures.

Limitations on MP3

This unit is compatible with multi-session but if there are a lot of sessions

it takes more time for play to start. Keep the number of sessions to a

minimum to avoid this.

This unit cannot play files recorded using packet write.

If the disc includes both MP3 and normal audio data (CD-DA), the unit

plays the type recorded in the inner part of the disc.

If the disc includes both MP3 and other types of audio data (e.g. WMA or

WAV), the unit plays only the MP3.

Depending on how you create MP3 files, they may not play in the order

you numbered them or may not play at all.

•

You can choose one of four types of sound quality.

Press [PRESET EQ] to select the sound quality.

Each time you press the button:•

Digital remaster is effective on CD (MP3)

Analog remaster is effective on Music Port

This feature reproduces the frequencies lost during recording to give you

a sound closer to the original.

Press [REMASTER] during play to select “RE-MASTER ON”.

Each time you press the button:•

Enables you to enjoy the powerful bass effect.

Press [D.BASS] to turn the D.BASS function on/off.

The actual effect depends on the disc.

You can create a three-dimensional sound field when listening to stereo

sound.

Press [SURROUND] to turn the Live Virtualizer on/off.

The actual effect depends on the source played.

Sound adjustment

Note

MP3

➡ Page 3 for the buttons position of remote control.

Sound quality

Live Virtualizer

Enhancing the bass

Re-master -

Enjoying more natural sound

HEAVY CLEAR SOFT

EQ-OFF VOCAL

(Adds punch to

rock)

(Clarifies higher

sounds)

(For background

music)

(Canceled) (Adds gloss to vocals)

Note

The SLEEP timer can turn the unit off after a set time.

Press [SLEEP] to turn the SLEEP function on/off.

Each time you press the button:

OFF (Canceled)

g To check the remaining time

Press [SLEEP] once

The play timer and sleep timer can be used together. The sleep timer

always has priority. Be sure not to overlap timer settings.

•

You can set the timer to come on at a certain time to wake you up.

Preparation:

Turn the unit on and set the clock.

Prepare the music source (disc, radio or music port) and set the

volume.

 Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY Original display

 Within 5 seconds, press [u, 2] or [i, 1] to set the starting time.

 Press [CLOCK/TIMER] to confirm.

 Repeat steps 2 and 3 to set the finishing time.

To activate the timer

 Press [zPLAY] to turn on the timer.

 Press [^] to turn off the unit.

To Action

Change the settings Repeat steps 1 to 4 and 6.

Change the source or

volume

 Press [zPLAY] to clear zPLAY indicator

from the display.

 Make changes to the source or volume.

 Perform steps 5 and 6.

Check the settings

(when the unit is on or

in standby mode)

Press [CLOCK/TIMER] repeatedly to select

zPLAY.

Cancel

Press [zPLAY] to clear the timer indicator

from the display.

The timer will start at the preset time, with the volume increasing

gradually to the preset level.

The timer comes on at the set time every day if the timer is on.

The unit must be in the standby mode for the timer to function.

If you turn the unit off and on again while the timer is functioning, the

finish time setting will not be activated.

When music port is selected as the source when the timer comes

on, the system turns on and engages music port as the source. If

you wish to playback from the portable audio equipment, activate the

equipment’s play mode and increase the volume. (See the portable

audio equipment’s instruction manual.)

•

Timer

This is a 24-hour clock.

 Press [CLOCK/TIMER] to set the clock.

 Press [u, 2] or [i, 1] to select the time within 5 seconds.

(Press and hold to change the time faster.)

 Press [CLOCK/TIMER] again.

g To display the clock when the unit

is on

Press [CLOCK/TIMER]

Note

The clock is accurate to within ±60 seconds a month. Readjust if

necessary.

Set again after disconnecting the AC mains lead or power failure.

•

Setting the time

Sleep timer

Play timer

30MIN 60MIN 90MIN 120MIN

Note

RE-MASTER ON RE-MASTER OFF

SC-EN36_EB (RQTX0143)_B5.indd 7 2/27/2008 3:33:15 PM

Panasonic SC-EN36 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-EN36

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info