612812

Panasonic SC-EN38DB Seite 11

11
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
11
RQTV0294
iPod will start recharging regardless of whether this unit is in On or
Standby condition.
“IPOD ” will be shown on the main unit’s display during iPod charging
in main unit standby mode.
Check iPod to see if the battery is fully recharged.
If you are not using iPod for an extended period of time after recharging
has completed, disconnect it from main unit, as the battery will be
depleted naturally. (Once fully recharged, additional recharging will not
occur.)
•
•
•
•
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
g Charging the iPod
■ Compatible iPod
Name Memory size
iPod touch 8GB, 16GB
iPod nano 3rd generation (video) 4GB, 8GB
iPod classic 80GB, 160GB
iPod nano 2nd generation (aluminum) 2GB, 4GB, 8GB
iPod 5th generation (video) 60GB, 80GB
iPod 5th generation (video) 30GB
iPod nano 1st generation 1GB, 2GB, 4GB
iPod 4th generation (colour display) 40GB, 60GB
iPod 4th generation (colour display) 20GB, 30GB
iPod 4th generation 40GB
iPod 4th generation 20GB
iPod mini 4GB, 6GB
Compatibility depends on the software version of your iPod.•
g PC Sync
Enables data synchronization between PC and iPod without unplugging
iPod from the set.
Preparation:
Confirm the iPod is well inserted into the dock. (➡ left)
Connect your PC to the main unit through USB cable. (PC will
automatically detect iPod.)
To transfer songs to iPod, refer to iPod instruction manual.
Before disconnecting the USB cable, make sure the procedure of
safe eject of hardware from PC is done.
PC Sync will function only when the main unit is in Standby or On condition.
Recording and operating problems may occur on some computer
systems.
Please note that Panasonic and Panasonic dealers cannot be held liable
for any lost audio data or other direct or indirect damage except in cases
of intentional or gross negligence.
The remote control and main unit are factory-set to “REMOTE 1” mode.
If your remote control affects other equipment during operation, you can
switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode
Press [DAB/FM/MUSIC P.] to select “FM”.
(While pressing [DAB/FM/MUSIC P.] on the main unit)
Press and hold [2] until “REMOTE 2” appears on the main unit
display.
Press and hold [ENTER] and [2] for at least 2 seconds.
The main unit and remote control are now set to operate in
“REMOTE 2” mode.
To return to “REMOTE 1” mode
Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3.
(“REMOTE 1” appears on the main unit during step 2.)
The remote control cannot work with the main unit if their modes are
different.
“REMOTE 1” or “REMOTE 2” appears on the main unit when you operate
the remote control.*
* If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)
Press and hold [ENTER] and [1] on the remote control for at least 2
seconds.
If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)
Press and hold [ENTER] and [2] on the remote control for at least 2
seconds.
External unit (continued)
➡ Page 3 for the buttons position of remote control and main unit.
Changing the main unit and
remote control mode
The USB connectivity enables you to connect and play MP3 tracks from
USB mass storage class. Typically, USB memory devices (Bulk only
transfer).
Preparation:
Before connecting any USB mass storage device to the unit, ensure that
the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device connected
via the cable will not be recognised by this unit.
Reduce the volume and connect the USB mass storage device.
Press [USB q/h] to start play.
MP3
To pause play
Press [USB q/h].
Press again to resume play.
To stop play
Press [g].
“RESUME” is displayed. The position is
memorized.
Press [USB q/h] to resume play.
OR
Press [g] again to clear the position.
To skip track
Press [u, 2] or [i, 1].
To skip album Press [ or , ALBUM] in the play mode.
Press [ or , ALBUM] once and then the
numbered buttons in the stop mode.
Direct access play
(Play starts with the
track you select.)
Press [ or , ALBUM ] to select the album.
Press [i, 1] once and then press the
numbered buttons to select the desired track.
g Display function
Press [DISPLAY] repeatedly during play or pause.
For other operating functions, they are similar as those described in “Disc
Operations” (➡ page 5 and 6).
To remove the USB mass storage device
Select a source other than “USB”.
Removing the USB mass storage device with it selected as a source can
damage the data stored in the device.
Elapsed time Album name Track name
ID3 (Artist) ID3 (Track) ID3 (Album)
Remaining time
g Compatible device
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer.
USB devices that support USB 2.0 full speed.
g Supported Format
Files must have the extension “.mp3” or “.MP3”.
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS file system is not supported [Only FAT 16/32
(File Allocation Table 16/32) file system is supported].
Depending on the sector size, some files may not work.
This unit can access up to 255 albums and 2500 tracks.
The maximum number of tracks in a folder are 999 tracks.
Only one memory card will be selected when connecting a multiport
USB card reader. Typically the first memory card inserted.
Disconnect the USB card reader from the unit when you remove the
memory card. Failure to do so may cause malfunction to the device.
When you connect your digital audio player to the USB jack, it charges
all the time except in standby mode.
•
•
•
•
•
•
•
•
•
•
Note
USB enabled device
(not included)
USB operations
By connecting a Bluetooth Receiver (e.g SH-FX570R, sold separately),
you can receive and play the audio stored in your Bluetooth audio source
device (mobile phone etc).
Connect the Bluetooth Receiver to the OPTION PORT through
a male-female cable (see the Bluetooth Receiver’s instruction
manual).
Press [q/h, OPTION] to select OPTION as the source.
Pair and play your Bluetooth audio device (see the device’s
instruction manual).
- To play / To pause play
Press [q/h, OPTION].
- Other basic operation functions are similar to “USB operations”.
(➡ above)
Connecting and playing a Bluetooth device
Bluetooth Receiver
(not included)
male-female cable
(not included)
SC-EN38DB_EB (RQTV0294)_MP.indd 11 2/18/2008 2:13:40 PM
… 11 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SC-EN38DB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info