Bedienungsanleitung Panasonic SC-EN53P (Seite 12 von 16) (Englisch)

612814

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Timer operations

RQT6734

To cancel the timer

Press [TIMER ON/OFF] to clear the timer indicator from the display.

The timer comes on at the set time everyday if the timer is on.

To change the settings (when the unit is on)

To change the play times

Do steps 1, 2, 3 and 5.

To change the source or volume

1. Press [TIMER ON/OFF] to clear the timer indicator from the display.

2. Make changes to the source or volume.

3. Do steps 4 to 5.

To check the settings (when the unit is off)

Press [CLOCK/TIMER ADJ].

The settings are shown in the following order:

start time→finish time→source→volume→current time

You can enjoy other sources after you have set the timer.

Turn the unit off before the timer’s start time.

Note

•

If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

•

If the unit is on, the timer will not function. The unit must be in the

standby mode.

•

If AUX is selected as the source, when the timer comes on, the

system turns on and engages AUX as the source. If you want to

playback from a connected unit, set that unit’s timer to the same

time. (See the connected unit’s instruction manual.)

Using the sleep timer

Remote control only

Set the unit to stop and turn off after a certain time.

While enjoying the desired source:

Press [SLEEP] to select the desired time.

Every time you press the button:

To cancel the sleep timer

Press [SLEEP] to select “OFF”.

To confirm the remaining time

(only while unit is ON)

Press [SLEEP].

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to select the new setting.

Note

The play and sleep timer can be used together.

The sleep timer always has priority. Be sure not to overlap timer

settings.

Using the play timer

Remote control only

The play timer can be set to on at a certain time to wake you up.

Preparations:

•

Turn the unit on and set the clock (A page 11).

•

Prepare the music source you want to listen to: CD, radio or aux,

and set the volume.

1 Press [CLOCK/TIMER ADJ] to select the timer function.

Every time you press the button:

ON TIME: to set the start time

OFF TIME: to set the finish time

Setting the start and finish times

2 During “ON TIME” display

(within 10 seconds or so)

1 Press [

g/∂] or [µ/

f] to select the start time.

2 Press [CLOCK/TIMER ADJ].

3 During “OFF TIME” display

1 Press [

g/∂] or [µ/

f] to select the finish time.

2 Press [CLOCK/TIMER ADJ].

The start and finish times are now set.

Turning the timer on

4 Press [TIMER ON/OFF] to display “

rPLAY”

The settings are shown in the following order:

start time → finish time

(The indicator doesn’t appear if the clock hasn’t been set.)

5 Press [

f] to turn the unit off.

The unit must be off for the timer to operate.

Play will start in the set condition at the set time with volume

increasing gradually to the set level.

Using the timers

CLOCK OFF TIMEON TIME

Previous displa

SLEEP 90 SLEEP 120SLEEP 60SLEEP 30

OFF

AUX

TUNER/BAND

TUNING MODE

LIVE VIRTUALIZER

PLAY MODE

VOLUME

DISP

L AY

SLEEP

PGM/

–CLEAR

CLEAR

OCK

TIMER ADJ

TIMER

ON/OFF

11-12 SC-SC-EN5 P [En] 1/14/03, 3:30 PM12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-EN53P Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info