Bedienungsanleitung Panasonic SC-HC2020 (Seite 19 von 32) (Englisch)

734666

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TQBJ2081

Others

Auto off

This system automatically switches off when you do not

use it for approximately 20 minutes.

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [Y, U] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

• This function does not work when you are in radio source or

when a Bluetooth

device is connected or when “STANDBY

MODE” is “ON”.

• If “STANDBY MODE” is set to “ON”, this function will also be

set to “ON”. To change the setting, set “STANDBY MODE”

to “OFF”. (~below)

Standby mode

This function automatically switches on the system when

you establish a Bluetooth

connection from a paired

device or when this system is selected as the network

device’s output speakers.

Select “NETWORK” or “BLUETOOTH” before switch off

this system to use this feature.

When you connect it to the home network for the first time,

this function will automatically switch to on.

You can also switch on the network standby using the

following steps:

1 Press [SETUP] repeatedly to select “STANDBY

MODE” and then press [OK].

2 Press [Y, U] to select “ON” and then press [OK].

When “STANDBY MODE” is “ON”

– The network (wired LAN/Wi-Fi) and Bluetooth

will

be active even in standby mode.

– The power consumption in standby mode will

increase. To reduce the power consumption in

standby mode, switch off the “STANDBY MODE”.

To switch off the standby mode

Select “OFF” in step 2.

When you have switched “STANDBY MODE” to “OFF”,

– Network and Bluetooth

standby will be active if the

system is switched to standby mode at “NETWORK”

and “BLUETOOTH” selector mode and this system is

connected to the network.

– To keep the “STANDBY MODE” switched off, select a

source other than “NETWORK” and “BLUETOOTH”

before switching the system to standby mode.

Note:

• This function will return to default setting if you have

performed the operation for reset. (

~20)

• When the system is switched on by this feature, the

beginning part of the music may not be played back.

• Depending on the app, the conditions for activating this

function may differ.

• The system may not be switched on even when selected as

the output speakers. Start playback.

Charging a device

This system can supply power to a device, such as

Android™ smartphone, connected to the USB port.

Note:

• Use a cable compatible with the device.

• Use the charger supplied with the device if power is not

supplied to the device.

• Do not use a cable or connect a device that exceeds the

rated value of 5 V, 1.5 A.

• Examine the screen of the device to check if charging is

complete. Disconnect the device after charging.

• Depending on the device, power may not be supplied to it.

• Read the operating instructions of the device for details.

Wi-Fi signal strength

To check the Wi-Fi signal strength where this system is

located.

Preparation

Connect this system to the wireless network. (~6)

1 Press [NET/ ] repeatedly to select “NETWORK”.

2 Press [SETUP] repeatedly to select “SIGNAL

LEVEL” and then press [OK].

Press [OK] again to exit.

Note:

• It is recommended to have a signal strength of “3”. Change

the position or angle of your wireless router or this system if

the indication is “2” or “1” and see if the connection

improves.

• If “LEVEL 0” is shown, this system cannot establish a link

with the wireless router. (

~21)

Wireless network name (SSID)

Show the name for the connected wireless network

(SSID).

1 Press [NET/ ] repeatedly to select “NETWORK”.

2 Press [SETUP] repeatedly to select “NET INFO”.

3 Press [Y, U] repeatedly to select “SSID” and then

press [OK].

Press [OK] again to exit.

Note:

• If “NO CONNECT” is shown on this system, it is not

connected to a wireless network.

• Characters that cannot be shown are replaced with “ ”.

SC-HC2020 EB.GN TQBJ2081 En_Rev 1-spec.fm Page 19 Wednesday, April 25, 2018 9:07 AM

offset printing rev. 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HC2020 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HC2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info