Bedienungsanleitung Panasonic SC-HC302 (Seite 10 von 20) (Englisch)

734662

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

TQBJ2071

DAB/DAB+

[HC302]

Preparation

Press [RADIO/AUX] to select “DAB+”.

Note:

If you select “DAB+” for the first time, the system will tune

automatically.

Manual tuning

1 Press [PLAY MENU] repeatedly to select

“MANUAL SCAN”.

2 Press [R, T] to select the frequency block and

then press [OK].

If no station is detected, “SCAN FAILED” is shown.

Adjust the antenna and try again.

To tune automatically

1 Press [PLAY MENU] to select “AUTOSCAN” and

then press [OK].

“START?” is shown.

2 Press [OK] to start tuning.

“DAB AUTO SCAN” is shown.

If no station is detected, “SCAN FAILED” is shown.

Do manual tuning.

Note:

Preset frequencies are erased after you do automatic tuning.

Memory presetting

You can preset up to 20 stations.

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2 Press [R, T] to select “STATION” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

4 Press [OK].

5 Press [R, T] to select a preset number and then

press [OK].

Repeat steps 3 to 5 to preset more stations.

The new station replaces any station that occupies the

same preset number.

Note:

You cannot preset a station when the station is not

broadcasting or when you have selected a secondary service.

█

Selecting a preset station

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2 Press [R, T] to select “PRESET” and then press

[OK].

3 Press [2/3] or [5/6] to select the preset

station.

Secondary service

You can listen to secondary services when “ ” is shown.

1 Press [PLAY MENU] repeatedly to select

“DAB SECONDARY”.

2 Press [R, T] to select the secondary service and

then press [OK].

To cancel, select “PRIMARY”.

Note:

The setting is cancelled when you select other stations.

Viewing available information

You can view the following information on the display

panel:

Press [DISPLAY].

Checking the signal quality

You can check the signal quality when adjusting the

antenna.

1 Press [PLAY MENU] repeatedly to select

“SIGNAL QUALITY”.

2 Press [OK].

The frequency block followed by the reception quality

is shown.

To select other frequency blocks, press [R, T].

3 Press [OK] again to exit.

Automatic clock adjustment

You can set the clock to update automatically.

1 Press [PLAY MENU] repeatedly to select

“AUTO CLOCK ADJ”.

2 Press [R, T] to select “ON ADJUST” and then

press [OK].

To cancel, select “OFF ADJUST”.

Dynamic label Information about the DAB

broadcast

PTY display Programme type

Ensemble label The name of the ensemble

Frequency display The frequency block and

frequency is shown

Time display Current time

Frequency

block

Frequency Reception quality

0 (poor) to 8 (excellent)

SC-HC302.300 EB.EG TQBJ2071 En.fm Page 10 Monday, January 8, 2018 11:27 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HC302 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HC302

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info