Bedienungsanleitung Panasonic SC-HC412 (Seite 16 von 28) (Englisch)

734659

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TQBJ2174

When “SC-HC412” or “SC-HC410” is selected from a

paired Bluetooth

device’s Bluetooth

menu, this unit

will turn on automatically from standby mode and

establish a Bluetooth

connection.

1 Press [SETUP] repeatedly to select “BLUETOOTH

STANDBY”.

2 Press [2, 1] to select “ON” and then press [OK].



≥ To turn the function off, select “OFF” in step 2.

≥ The factory default is “OFF”. If this function is set to “ON”, the

standby power consumption will increase.

When other Panasonic equipment responds to the

supplied remote control, change the remote control

code.

1 Press [CD/USB] repeatedly to select “CD”.

2 Press and hold [∫] on the unit and [2] on the

remote control until the unit’s display shows

“REMOTE 2”.

3 Press and hold [OK] and [2] on the remote control

for at least 4 seconds.



≥ To change the mode back to “REMOTE 1”, repeat the steps

above but replace [2] with [1].

Occasionally, Panasonic may release updated

software for this system that may add or improve the

way a feature operates. These updates are available

free of charge.

For more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

Press [SETUP] repeatedly to select “SW VER.” and

then press [OK].

The version of the installed software is displayed.

≥ Press [OK] to exit.

Troubleshooting

Before requesting service, make the following checks.

If you are uncertain about some of the check points, or

if the solutions indicated in the following guide does not

resolve the issue, then consult your dealer for

instructions.

Cannot turn on the unit.

≥ After connecting the AC mains lead, wait about 10 seconds before

turning on the unit.

Humming heard during playback.

≥ If an AC mains lead or fluorescent lights are near the cords, then

keep other appliances and cords away from the cables.

The unit does not work.

≥ One of the unit’s safety devices may have been activated.

1 Press [Í/I] on the unit to switch the unit to standby.

≥ If the unit does not turn off, disconnect the AC mains lead

from the mains socket, reconnect it to the outlet after about

30 seconds. Then wait for about 10 seconds.

2 Press [Í/I] on the unit to switch it on. If the unit still cannot be

operated, consult the dealer.

Charging does not start during standby mode.

≥ Turn the unit on. Check the charging has started, and then turn

the unit to standby mode. (l 7)

Noise is heard.

≥ When a device is connected to both the AUX IN jack and the USB

port, noise may be generated depending on the device. In this

case, remove the USB cable from the USB port.

The remote control does not work properly.

≥ The battery is depleted or inserted incorrectly. (l 5)

Incorrect display or play does not start.

≥ Make sure that the disc is compatible with this unit. (l 6)

≥ There is moisture on the lens. Wait for about an hour and then try

again.

Bluetooth

standby

Changing the unit and remote

control code

Software update

Checking the software version

To return all settings to the factory defaults

When the following situations occur, reset the memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the settings.

1 Disconnect the AC mains lead. (Wait for at least

30 seconds before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the

unit, reconnect the AC mains lead.

≥ Keep holding down [Í/I] until “---------” appears on the

display.

3 Release [Í/I].



≥ The settings are returned to the factory defaults. It is

necessary to set the settings again.

General

Remote control

Disc

SC-HC410_412-EGEB~TQBJ2174.book 16 ページ２０１８年１１月９日　金曜日　午前９時４１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HC412 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HC412

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info