Bedienungsanleitung Panasonic sc ht 340 (Seite 26 von 36) (Englisch)

370661

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

OTHER OPERATIONS

ENGLISH ENGLISH

ENGLISH

RQT8043

RQT8589

MEMORY

SELECTOR

-TUNE MODE/

–FM MODE

TUNER/BAND

ENTER

Numeric

buttons

FUNCTIONS

4 TUNING 3

Using the radio

Manual tuning

Main unit only

1 Press [SELECTOR] to select “FM” or “AM”.

2 Press [- TUNE MODE] to select “MANUAL”.

Every time you press the button:

MANUAL  PRESET

3 Press [4 TUNING 3] to select the frequency.

Press and hold [4 TUNING 3] until the frequency starts

scrolling to start automatic tuning. Tuning stops when

a station is found.

Preseting the channel

Up to 15 stations can be set in each band, FM and AM.

1 While listening to the radio broadcast

Press [ENTER].

2 While the frequency and “PGM” are ﬂ ashing on the

display

Press the numeric buttons to select a channel.

Example: To select 12, [

10] \ [1] \ [2]

Alternatively, press [4, 3], then press [ENTER].

The station occupying a channel is erased if another

station is preset to that channel.

Automatic presetting

Main unit only

1 Press [SELECTOR] to select “FM” or “AM”.

2 Press [- TUNE MODE] to select “MANUAL”.

3 Press [4 TUNING 3] to tune to the lowest frequency

(FM: 87.50, AM: 522).

For Southeast Asia, Thailand,

the Middle East, South Africa,

Saudi Arabia and Kuwait

: (AM: 522 or 520)

4 Press and hold [MEMORY].

Release the button when “FM AUTO” or “AM AUTO”

is displayed.

The tuner presets all the stations it can receive into the

channels in ascending order.

• “SET OK” is displayed when the stations are set, and

the radio tunes to the last preset station.

• “ERROR” is displayed when automatic presetting

is unsuccessful. Preset the channels manually

(\ see left).

Selecting the preset channels

1 Press [TUNER/BAND] to select “FM” or “AM”.

2 Press the numeric buttons to select the channel.

Alternatively, press [4, 3].

When a stereo FM broadcast is being received, “ST”

lights in the display.

If noise is excessive in FM

Main unit only

Press and hold [– FM MODE] to display “MONO”.

Press and hold [– FM MODE] again to cancel the mode.

The mode is also canceled when you change the

frequency.

When “AM” is selected

Press [FUNCTIONS] on the remote control.

Every time you press the button: BP 2  BP 1

• The setting is recalled whenever “AM” is selected.

AM allocation setting

Main unit only

For Southeast Asia, Thailand, the Middle East,

South Africa, Saudi Arabia and Kuwait

The step is factory-set to 9 kHz, but you can change it to

receive broadcasts allocated in 10-kHz steps.

1 Press [SELECTOR] to select “FM”.

2 Press and hold [SELECTOR].

After a few seconds, the display changes to show

the current minimum frequency. Continue to hold the

button down. The minimum frequency changes and the

step is changed.

To return to the original setting, repeat the above

procedure.

Note

After changing the setting, previously preset frequencies will be

cleared. Preset them again.

4, 3

RQT8589-BG.indd 26RQT8589-BG.indd 26 4/20/06 11:16:19 AM4/20/06 11:16:19 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc ht 340 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc ht 340

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info