Bedienungsanleitung Panasonic SC-HTB01 (Seite 20 von 25) (Englisch)

734492

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Other

Troubleshooting

Before requesting service, make the following checks.

If you are in doubt about some of the check points, or if

the solutions indicated in the following guide do not solve

the problem, consult your dealer for instructions.

The remote control does not work properly.

• It may be necessary to set the code of the remote

control again after changing the battery of the remote

control. (> 16)

Other Panasonic audio products are operated

inadvertently by the remote control of this

system.

• Set this system and the remote control to “Mode 2”.

(> 16)

This system is automatically switched to standby

mode.

• There is a function that turns off this system

automatically when it has been left for 20 minutes

without an input signal and without any operations.

(Auto power down) (> 16)

This system does not operate correctly.

• Is the HDMI cable connected to the IN and OUT

terminals the other way around?

Turn off this system, and disconnect the AC mains lead

and reconnect the HDMI cable.

• The remote control code is different on this system and

the remote control if the GN-GAME/AV OR-TV indicator

repeats a pattern of blinking twice and turning off three

times. Set the remote control code again. (> 16)

The TV’s sound is not heard from this system.

No sound (or image) is output even after the

connected device starts playback.

• Check the connections to the other device. (> 7)

• Turn this system off and then on again.

• If this system is connected to a TV with an HDMI cable,

check that the TV’s HDMI terminal is labelled “HDMI

(ARC)”. If not, TV sound cannot be output from this

system. When using a TV with an HDMI terminal that is

not labelled “ARC”, connect the DIGITAL AUDIO OUT

(OPTICAL) of the TV and the OPTICAL DIGITAL AUDIO

IN (TV) terminal using an optical digital audio cable (not

supplied).

• If this system is connected to a Panasonic TV (VIERA),

when you turn on this system by operating it directly,

sound may not be output from it. In this case, turn on

this system via VIERA Link by operating the remote

control of the TV (VIERA).

• If the connections are correct, there might be a problem

with the cables. Redo the connections with different

cables.

• Check the audio output settings on the connected

device.

• Use the following procedure to check for the input signal

from the connected device.

To return to the factory defaults.

If this system does not operate as expected,

returning the settings to the factory preset may

solve the problem.

While this system is on, press and hold [Í/I] on this

system for more than 4 sec. (All the indicators will blink

twice when this system is reset.)

• The remote control code will return to “1” when this

system is returned to the factory preset. To change the

remote control code, refer to page 16.

1 Press [INPUT] to switch to the input source for

the input signal you want to check.

2 Press and hold [VOL j] on this system and

[CINEMA] on the remote control at the same

time for 4 or more seconds.

The CLR DIALOG indicator blinks and the 3D

SRND indicator lights.

Lights orange: There is an audio signal being input.

Lights green: There is no audio signal being input.

The selected input source lights.

– If there is no audio signal being input, it is possible

that there is a problem with the connection cable.

Try connecting with another cable if you have one.

If sound is still not output, there is either a problem

with the settings on the connected device or there

is a malfunction. Refer to the operating instructions

for the connected device.

– If there is an audio signal being input, it is possible

that this system is malfunctioning. Turn this

system off, unplug the AC adaptor, and then

consult your dealer.

– This operation is not available when input is “

(Bluetooth

)”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB01 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HTB01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info