Bedienungsanleitung Panasonic SC-HTB200 (Seite 16 von 24) (Englisch)

696392

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TQBJ2086

The WIRELESS LINK indicator does not lights up.

• There is no link between the main unit and the

active subwoofer.

Check that the main unit is switched on.

• The active subwoofer and the main unit may not be

paired correctly. Try the following operation.

(Wireless pairing)

A Switch on the main unit.

B Press and hold [I/D SET] on the rear of active

subwoofer for a minimum of 4 seconds.

The wireless link indicator will blink.

C Press [MUTE], [SOUND]*, [MUTE]*,

[ -PAIRING]* consecutively.

* Within 3 seconds.

“ ”, “OPTICAL” and “HDMI (ARC)” indicators

will blink in rotation.

When the wireless link pairing is successful, “ ”,

“OPTICAL” and “HDMI (ARC)” indicators will switch

off.

Consult your dealer if the problem persists.

Remote control code

When other Panasonic equipment responds to the

remote control of this system, change the remote

control code for this system.

Preparation

• Switch off all other Panasonic products.

• Switch on this system.

• Aim the remote control at the remote control

sensor of this system.

█

To set the code to code 2

Press and hold [ -PAIRING] and [SOUND] on

the remote control for a minimum of

4 seconds.

█

To set the code to code 1

Press and hold [ -PAIRING] and [DIMMER] on

the remote control for a minimum of

4 seconds.

System memory reset

Reset the memory when the following situations

occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory

contents.

Press and hold [1] on the main unit for a

minimum of 4 seconds.

All the indicators blink until the system restarts.

Note:

The remote control code will set back to code 1 after memory

reset, refer to “Remote control code” on how to change to

code 2.

Unit care

Disconnect the AC mains lead before

maintenance. Clean this system with a soft, dry

cloth.

• When dirt is heavy, wring a cloth moistened in

water tightly to wipe the dirt, and then wipe it

with a dry cloth.

• When cleaning the speakers, use a fine cloth.

Do not use tissues or other materials (towels,

etc.) that can fall apart. Small grains may get

stuck inside the speaker cover.

• Never use alcohol, paint thinner or benzine to

clean this system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

To dispose or transfer this system

This system may keep the user settings

information in the main unit. If you discard the

main unit either by disposal or transfer, then follow

the procedure to return all the settings to the

factory presets to delete the user settings.

(

~above)

• The operation history may be recorded in the

memory of the main unit.

MUSIC CINEMA HDMI(ARC) OPTICAL

Software update

Occasionally, Panasonic may release updated

software for this unit that may add or improve the

way a feature operates. These updates are

available free of charge. For more details, refer

to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

TQBJ2086_en.fm Page 16 Wednesday, December 27, 2017 2:30 PM

offset printing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB200 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HTB200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info