Bedienungsanleitung Panasonic SC-HTB550 (Seite 26 von 36) (Englisch)

511449

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT9660

Advanced operations

Change the dual audio from main to secondary.

Confirm the digital audio output

setting on the connected TV or

player, etc. is set to “Bitstream”.

Press and hold [TV] for more than 2

sec.

While the indicator of the current

setting is blinking, press [TV] to

change the setting.

≥ The indicator for the current setting blinks for 10 sec.

≥ The setting works only when the dual audio is available

in the audio source.

≥ The setting is maintained until it is changed again.

≥ The same setting is used for all digital audio sources.

With this function, you can prevent sudden loud sounds.

The output will be reduced automatically when the input

exceeds a certain level.

Press and hold [INPUT SELECTOR]

on remote controller for more than 2

sec.

≥ The indicator for the current setting blinks for 10 sec.

While the indicator is blinking, press

[INPUT SELECTOR] to change the

setting.

≥ The setting changes each time [INPUT SELECTOR] is

pressed.

≥ The setting is maintained until it is changed again.

≥ Default setting of this function is OFF.

You can select different modes to suit the type of

connections which emphasis on connectivity or high

quality audio.

≥ Make sure that a Bluetooth

device is already paired

with this unit. (> 22)

Disable the Bluetooth

connection of

the device.

≥ “” indicator will blink slowly.

Press [LINK MODE, ] to display the

current mode.

≥ The indicator for the current setting blinks for 10 sec.

While the mode is displayed, press

[LINK MODE, ] to select the mode.

≥ The setting changes each time [LINK MODE, ] is

pressed.

≥ The setting is maintained until it is changed again.

Depending on your preference, It is possible to use only

the Dolby Virtual Speaker effect by turning off the 3D

surround effect and the clear-mode dialog effect.

Press and hold [TV] on the remote

control and followed by [VOL r] on

the main unit for more than 2 sec.

≥ The indicator for the current setting blinks for 10 sec.

While the indicator is blinking, press

[TV] to change the setting.

≥ The setting changes each time [TV] is pressed.

≥ This setting will be reset to on when this system is

turned off.

≥ When off is selected, the dialog effect level cannot be

adjusted.

Changing the dual audio

A : Main

B : Secondary

(SAP: Secondary Audio Program)

A, B : Main and secondary

Auto gain control

Dolby Digital indicator blinks:

Auto gain control is on.

PCM indicator blinks:

Auto gain control is off.

Bluetooth

communication

mode

MODE1: (Factory preset)

Emphasis on connectivity

MODE2:

Emphasis on audio quality

To turn off the 3D surround

effect and clear-mode

dialog effect

Dolby Digital indicator blinks:

3D surround effect and clear-

mode dialog effect is on.

PCM indicator blinks:

3D surround effect and clear-

mode dialog effect is off.

RQT9660~Body_mst.fm Page 26 Tuesday, March 6, 2012 10:32 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB550 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info