Bedienungsanleitung Panasonic SC-HTB680 (Seite 26 von 36) (Englisch)

563918

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT9916

Referenc e

Troubleshooting

Before requesting service, make the following

checks. If you are in doubt about some of the

check points, or if the solutions indicated in the

following guide do not solve the problem, consult

your dealer for instructions.

No power.

≥ Unplug the AC mains lead for 10 sec before

plug in again.

≥ After turning the main unit on, if the main unit

immediately turns off, unplug the AC mains lead

and consult your dealer.

≥

If the main unit does not turn on by turning on TV

(HDAVI control), turn on the main unit manually.

If the problem persists, refer to “HDMI” in

“Troubleshooting”.

The remote control does not work properly.

≥ The battery is depleted. Replace it with a new

one. (> 8)

≥ It is possible that the insulation sheet has not

been removed. Remove the insulation sheet.

(> 8)

≥ It may be necessary to set the code of the

remote control again after changing the battery

of the remote control. (> 20)

≥ Use the remote control within the correct

operation range. (> 8)

≥ Check which remote control signal sensor is

working by the following operation.

jTouch and hold [INPUT] on the main unit for

more than 4 sec. “ON TABLE” or “ON WALL”

is indicated on the display for 4 sec.

jRefer to page 8 “About remote control signal

sensor” for the remote control signal sensor

location.

The main unit is automatically switched to

standby mode.

“AUTO POWER DOWN” function is on.

The main unit will automatically switch to standby

mode when no signal is input and no operation is

performed for approx. 20 minutes. Refer to page

24 to turn this function off.

The main unit is turned off when the TV’s

speakers are selected in the speaker control.

This is a normal feature when using VIERA Link

(HDAVI Control 4 or later). Please read the

operating instructions for the TV for details about

its power save feature. (> 25)

The switches on the main unit do not work.

[Í/I], [j VOL i], [INPUT], and [ ] on the main

unit are touch keys. Touch the switches with your

finger. They may not work if operated with your

fingernails or hands wearing gloves.

This system does not operate correctly.

If the HDMI cable is connected to the wrong

terminal (HDMI AV IN or HDMI AV OUT), this

system will not operate correctly. Turn the main

unit off, disconnect the AC mains lead and

reconnect the HDMI cable(s). (> 9, 10)

VIERA Link related operations no longer

function properly.

≥ Check the VIERA Link setting on the connected

devices.

jTurn on VIERA Link function on the

connected devices.

jSelect this system as the speaker in the TV's

VIERA Link menu.

≥

Have you turned the VIERA Link settings off? (

24)

≥ When the HDMI connections are changed, after

a power failure or after the AC mains lead has

been removed, VIERA Link operations may not

function properly.

Turn on all the devices that are connected to the

TV with an HDMI cable and then turn the TV on.

jTurn off the VIERA Link settings of the TV and

turn it on again. For details refer to the

operating instructions for the TV.

jWhile the main unit and the TV are connected

with the HDMI cable, turn on the TV and then

remove the main unit’s AC mains lead and

reconnect it again.

To return to the factory preset.

While the main unit is on, touch and hold [Í/I] on

the main unit for more than 4 sec.

(“RESET” is indicated on the display when this

system is reset.)

If this system does not operate as expected,

returning the settings to the factory preset

may solve the problem.

≥ The remote control code will return to

“REMOTE 1” when this system is returned to

the factory preset. To change the remote

control code, refer to page 20.

General operation

HDMI

SC-HTB680EB_RQT9916-B.book 26 ページ２０１４年２月２７日　木曜日　午前１０時２５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB680 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HTB680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info