Bedienungsanleitung Panasonic SC-HTB770 (Seite 29 von 44) (Englisch)

618145

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Getting started

Operations

RQT9849

Operations

Using this system

Preparation

≥ Turn on the active subwoofer.

≥ Turn on the TV and/or connected device.

Press [Í] to turn on the main unit.

Select the source.

≥ This remote control cannot be used to control the

operations of the connected devices.

∫ When “ ” is selected as the source

On the Bluetooth

device:

Select this system as the output source of the

connected Bluetooth

device and start the

playback.

∫

When

“BD/DVD”, “AUX

” or “AUX

”

is selected as the source

On the TV and the connected device:

Select the TV’s input for this system and start the

playback on the connected device.

∫ When “AUX3” is selected as the

source

On the TV and the connected device:

Select the TV’s input for the device connected to “AUX3”

terminal and start the playback on the connected device.

Adjust the volume and sound effect

level.

∫ To adjust the volume of this system

Press [i VOL j].

≥ Volume range: 0 to 100*

∫ To adjust the dialog effect level

This setting will change the level of the Clear-

mode dialog effect. (> 30)

1Press [i DIALOG LEVEL j] to display the

current level.

2 While the level is displayed:

Press [i DIALOG LEVEL j] to adjust the

level.

∫ To adjust the subwoofer level

1Press [i SUBWOOFER j] to display the

current level.

2 While the level is displayed:

Press [i SUBWOOFER j] to adjust the

level.

≥ The level indication pattern is the same as dialog effect

level.

∫ To mute the sound

Press [MUTE].

≥ While muting, the sound mode indicators blink

simultaneously.

≥ To cancel, press the button again or adjust the volume.

≥ Muting is cancelled if the main unit is turned off.



* The sound mode indicators blink from left to right (i) or from right to left (s) while adjusting.

The indicators will not blink when it has reached the maximum or minimum.

≥ If there is sound coming out of the TV’s speakers, reduce the volume of the TV to its minimum.

≥ If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the

volume to the middle (50) when the main unit is turned on (Volume limitation).

To turn this function off, refer to page 34.

Press To select

[INPUT

SELECTOR]

“TV”--------#“BD/DVD”--------#“AUX1”

^- “”(- “AUX3”(- “AUX2”(}

[] “ ” (Bluetooth

)

DIALOG LEVEL

LINK MODE

PAIRING

----

SOUND

INPUT

SELECTOR

Indication Effect level

4 Highest

1 Lowest

If this system does not operate as expected or sound is unusual, returning the settings to

the factory preset may solve the problem. (> 34)

SC-HTB770_RQT9849-B_mst.book 29 ページ２０１３年２月２５日　月曜日　午前１１時５３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB770 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HTB770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info