Bedienungsanleitung Panasonic sc pm 3 (Seite 10 von 16) (Englisch)

159317

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQTV0085

Radio

Numeric

buttons

Manual tuningManual tuning

Press [TUNER/BAND] to select “FM” or “AM”.

Press [PLAY MODE] to select “MANUAL”.

Press [ /REW/4] or [ /FF/¢] to select the

frequency of the required station.

“

ST ”

is displayed when a stereo FM broadcast is being

received.

To tune automatically

Press

[ /REW/4] or [ /FF/¢] for a moment until the

frequency starts changing rapidly. The unit begins auto

tuning, stopping when it ﬁ nds a station.

• Auto tuning may not function when there is excessive

interference.

• To cancel auto tuning, press [ /REW/4] or [ /FF/¢]

once again.

To improve FM sound qualityTo improve FM sound quality

Press and hold [PLAY MODE] to display “MONO”.

To cancel

Press and hold [PLAY MODE] again until “MONO”

disappears.

• MONO is also cancelled if the frequency is changed.

• Turn off “MONO” for normal listening.

RDS broadcasting (For Europe)RDS broadcasting (For Europe)

Enable you to display the name of a broadcasting station or

a program type.

Press [DISPLAY] to display:

Station Name (PS)

Program Type (PTY)

Frequency display

RDS displays may not be available if reception is poor.

Program type displays

NEWS VARIED FINANCE COUNTRY

AFFAIRS POP M CHILDREN NATIONAL

INFO ROCK M SOCIAL A OLDIES

SPORT M.O.R.M

RELIGION FOLK M

EDUCATE LIGHT M PHONE IN DOCUMENT

DRAMA CLASSICS TRAVEL TEST

CULTURE OTHER M LEISURE ALARM

SCIENCE WEATHER JAZZ

M.O.R.M = “Middle of the road music”

Memory presetMemory preset

Up to 15 stations can be set in both the FM and AM bands.

Preparation

Press [TUNER/BAND] to select “FM” or “AM”.

Automatic presettingAutomatic presetting

Press and hold [PROGRAM] to start presetting.

Manual presettingManual presetting

Press [PLAY MODE] to select “MANUAL”.

Press [ /REW/4] or [ /FF/¢] to tune to the

required station.

Press [PROGRAM].

Press numeric buttons to select a channel.

The station occupying a channel is erased if another

station is preset in that channel.

Repeat steps 2 to 4 to preset more stations.

Selecting a preset stationSelecting a preset station

Press numeric buttons to select the channel.

For channels 10 to 15 press [

10], then the two digits.

Press [PLAY MODE] to select “PRESET”.

Press [ /REW/4] or [ /FF/¢] to select the

channel.

AM allocation settingAM allocation setting

By main unit only

This system can also receive AM broadcasts allocated in

10 kHz steps.

To change the step from 9 kHz to 10 kHz.

Press and hold [TUNER/BAND].

After a few seconds the display changes to a ﬂ ashing

display of the current minimum frequency.

Continue to hold down [TUNER/BAND].

• When the minimum frequency changes, release the

button. To return to the original step, repeat the above

steps.

• After the setting is changed, any previously preset

frequency will be cleared.

PM3_EB_En.indd 10PM3_EB_En.indd 10 2/7/06 10:52:58 AM2/7/06 10:52:58 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc pm 3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc pm 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info