Bedienungsanleitung Panasonic sc pm 91 (Seite 28 von 36) (Englisch)

157230

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT7932

Convenient functions

The play/record timer

You can set the timer to come on at a certain time to wake you up (play

timer) or to record a radio station or from the external source (record

timer).

The play and record timers cannot be used together.

• Switch on the unit and set the clock

(➡ Setting the time, page 9).

• For the play timer, prepare the desired music source (tape, CD, radio,

or external), and set the volume.

• For the record timer, check the cassette’s erasure prevention tabs

(➡ Erasure prevention, page 25) and insert the tape (➡ Cassette tapes,

page 24). Tune to the radio station (

➡ The radio, page 23) or select the

external source (➡ Using an external unit, page 29).

1 Press [CLOCK/TIMER] to select the timer function.

Every time you press the button:

CLOCK

→

z PLAY

→

z REC

Previous display

zPLAY: to set the play timer

zREC: to set the record timer

2 ON time setting

(Within 6 seconds or so)

Press [u2/REW] or [i1/FF] to set the start time.

Press [CLOCK/TIMER].

3 OFF time setting

Press [u2/REW] or [i1/FF] to set the ﬁnish time.

Press [CLOCK/TIMER].

The start and ﬁnish times are now set.

4 Press [zPLAY/REC] to display the timer indicator.

zPLAY: to turn the play timer on

zREC: to turn the record timer on

(The indicator doesn’t appear if the start and ﬁnish times or the clock

have not been set.)

5 Press [^] to turn the unit off.

The unit must be off for the timers to operate.

• Play timer: Play will start in the set condition at the set time with

volume increasing gradually to the set level.

• Record timer: The unit comes on 30 seconds before the set time

with the volume muted.

To cancel the timer

Press [zPLAY/REC] to clear the timer indicator from the display.

(The timer comes on at the set time everyday if the timer is on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2, 3 and 5.

To change the source or volume

1. Press [

zPLAY/REC] to clear the timer indicator from the display.

2. Make changes to the source or volume.

3. Do steps 4 to 5.

To change the timer

Press [zPLAY/REC] to select the desired timer.

Every time you press the button:

z PLAY → z REC

(off)

To check the settings

Press [CLOCK/TIMER] while the unit is on to select “zPLAY” or

“zREC”.

The settings are shown in the following order:

Play timer: start time

→

ﬁnish time

→

source

→

volume

Record timer: start time

→

ﬁnish time

→

source

To check the settings while the unit is off, press [CLOCK/TIMER] twice.

If you use the unit after the timers are set

After using, check that the correct tape or disc is loaded before turning

the unit off.

• If you turn the unit off and on again while a timer is functioning, the

ﬁnish time setting will not be activated.

• If you selected AUX as the source, when the timer comes on, the unit

turns on and engages “AUX” as the source. If you want to playback or

record from a connected unit, set that unit’s timer to the same time. (See

the connected unit’s instruction manual.)

Note

Convenient functions

SCPM91D-Pbook.indb 28 3/17/2005 11:55:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc pm 91 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc pm 91

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info