61510
13
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
RQTV0301
13
13
ENGLISH
Changing the remote control codeChanging the remote control code
Change the code if you fi nd the remote control unintentionally also
controls other equipments.
Change the main unit’s code
Press and hold [MUSIC P.] on the main unit and then press and
hold [2] (or [1]) on the remote control.
“REMOTE 2” is displayed.
Change the remote control’s code
Press and hold [ENTER] and [2] (or [1]) on the remote control for
at least 2 seconds.
If the remote control and main unit are using different codes, a
message appears on the main unit’s display showing the main unit’s
current code. Follow the above step to change the remote control’s
code to match it.
Using other equipment (continued)
Compatible devices
Devices which are defi ned as USB mass storage class:
USB devices that support bulk only transfer.
USB devices that support USB 2.0 full speed.
Supported Format
Files must have the extension “.mp3” or “.MP3”.
Note
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS fi le system is not supported [Only FAT
12/16/32 (File Allocation Table 12/16/32) fi le system is supported].
Depending on the sector size, some fi les may not work.
• This unit can access up to 255 albums (including blank folders) and
2500 tracks.
The maximum number of tracks in a folder are 999 tracks.
• Only one memory card will be selected when connecting a multiport
USB card reader. Typically the fi rst memory card inserted.
Do not unplug the USB device during reading or playback.
Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
When you connect a compatible digital audio player to the USB
port, charging may be activated. It will not charge when the unit is
switch to standby mode or during tape recording.
Connecting and playing a portable Connecting and playing a portable
audio equipmentaudio equipment
This feature enables you to enjoy music from portable audio
equipment.
Audio cord (not included)
Portable audio equipment
(not included)
Switch off the equalizer function (if there is any) of the portable audio
equipment before you plug into the MUSIC PORT jack. Otherwise,
sound from the speaker may be distorted.
1
Plug the audio cord into the MUSIC PORT jack and press
[MUSIC PORT].
2
Play the portable audio equipment. (See the portable audio
equipment’s instruction manual.)
Note
All peripheral components and cables are sold separately.
PM46_E_EN_new23.indd 13PM46_E_EN_new23.indd 13 1/10/08 10:37:01 AM1/10/08 10:37:01 AM
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SC-PM46 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic SC-PM46

Panasonic SC-PM46 Bedienungsanleitung - Deutsch - 40 seiten

Panasonic SC-PM46 Bedienungsanleitung - Holländisch, Dänisch - 44 seiten

Panasonic SC-PM46 Bedienungsanleitung - Französisch, Italienisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info