Bedienungsanleitung Panasonic SC-PMX100 (Seite 7 von 24) (Englisch)

618452

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT9995

6 Select “PMX100 _AJ” to connect to this

system.

•“  ” stands for a character that is unique to each set.

• This can take up to 1 minute to appear in your Wi-Fi

list.

• Make sure that DHCP is enabled for the network

setting on your compatible device.

• iOS device: The settings page will be automatically

displayed in the Internet browser.

• Except iOS device: Open the Internet browser and

refresh the page to display the settings page.

– If the settings page is not displayed, type “http://

172.19.42.1/” into the URL address field.

7 Type a device name and then select “Next”.

• The device name will be displayed as this system's

name on the network.

• Maximum characters that can be shown: 32

• The device name is set when “Next” is selected.

• You can also change the device name after the network

connection is set up. (> 8, “To make network-related

settings”)

8 Select your security options for this system.

To set the AirPlay password

1 Select “Yes” and then select “Next”.

2 Set your password and then select “Next”.

• You will need this password the next time this network

setting method is used.

• If you have performed a network reset (> 18)

, the

password will be cleared.

To skip this setting

Select “No” and then select “Next”.

• You can also change this setting after the network

connection is set up. (> 8, “To make network-related

settings”)

9 Select your network name (SSID) and type the

password.

• Check the wireless router for the network name (SSID)

and the password.

• A list of network names (SSIDs) will be appeared when

you select the “Network Name” box.

• To show the characters typed in the “Password” box,

select “Show Password”.

• If your network requires specific settings, deselect

“DHCP” to disable DHCP.

– You can use specific IP address, subnet mask,

default gateway, primary DNS, etc.

Select “Connect” to apply the settings.

• On the main unit’s display, “Success” appears when

the connection is established. (“ ” will be

displayed.)

– If “Fail” is displayed press [OK], check the network

name (SSID) and the password, and then try the

setting again.

• Depending on the device, the connection complete

screen may not be displayed.

Make sure to connect your compatible device

back to your home wireless network.

Note:

• Enable Java and Cookies in your browser settings.

1 Press [RADIO, EXT-IN] on the remote control

repeatedly to select “Network”.

2 To enter “WPS Push” mode

1 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

“WPS Push” is indicated on the display.

2 Press [OK].

• Alternatively, press and hold [SELECTOR] and

[5/9] on the main unit for at least 4 seconds.

“WPS” flashes on the display.

3 Activate the WPS button on the wireless router.

• On the main unit’s display, “Success” appears when

the connection is established. (“ ” will be

displayed.)

– "Fail" may be displayed if the connection was not

made within the set time limit. Try the setting again. If

"Fail" is still displayed, try other methods.

4 Press [OK] on the remote control to exit the

setting.

∫ Using the WPS PIN code

1 Press [RADIO, EXT-IN] on the remote control

repeatedly to select “Network”.

2 To enter “WPS PIN” mode

1 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

2 Press [3, 4] on the remote control to select

“WPS PIN” and then press [OK].

• Alternatively, press and hold [SELECTOR] and

[:/6] on the main unit for at least 4 seconds.

The PIN code is indicated on the display.

3 Enter the PIN code into the wireless router.

Note:

• Once the system enters WPS PIN code mode, you cannot

set up using the WPS button. To use the WPS button, turn

the system off and then on, and redo the network settings.

• Depending on a router, other connected devices may

temporarily lose their connection.

• For details, refer to the operating instructions of the

wireless router.

Method 3:

Using WPS (Wi-Fi Protected Setup™)

A compatible wireless router may have the WPS

identifier mark.

●●●●●●●●

e.g.,

SC-PMX100-100B_EGEBGN-RQT9995-B.book 7 ページ２０１５年４月２０日　月曜日　午後３時４５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info