Bedienungsanleitung Panasonic SC-PMX100 (Seite 6 von 24) (Englisch)

618452

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT9995

Network settings

You can stream music from an iOS device (iPhone/iPad/

iPod), an Android™ device or a PC (Mac/Windows) to

this system’s speakers by using the Qualcomm

AllPlay™ smart media platform, DLNA feature, or

AirPlay. To use these features, this system must join the

same network as the compatible device.

Qualcomm

AllPlay™ smart media platform is a product of

Qualcomm Connected Experiences, Inc.

• Please update the system’s software after the network

settings are complete. (> 17)

Choose a network setting method from the following.

Note:

• The setting will be cancelled after the set time limit. In that

case, try the setting again.

To cancel this setting in the middle, press [∫].

This system has built-in Wi-Fi

and can be connected to

a wireless router.

Preparation

• Place this system as close to the wireless router as

possible.

• Do not connect a LAN cable. Doing so will disable the

Wi-Fi

function.

• Point the antenna on the rear of

the main unit up as shown in the

figure.

• Do not perform the following:

- Tilting the antenna forward or

backwards when it is pointing up

- Applying too much force to the

antenna

- Carrying this unit by holding the antenna

1 Turn this system on.

2 Proceed to “Method 1”, “Method 2” or

“Method 3”.

• The following explanations are based on an iPhone.

1 Connect the iPhone to your home wireless

network.

2 Press [RADIO, EXT-IN] on the remote control

repeatedly to select “Network”.

• When “WAC Mode” is indicated on the display, proceed

to step 3.

– If the display stays at “Network”, perform the

operation for network reset. (> 18)

3 Go to Wi-Fi settings on your iPhone.

4 Select “Panasonic PMX100 ” under the

“SET UP NEW AIRPLAY SPEAKER...”.

•“  ” stands for a character that is unique to each set.

5 The “AirPlay Setup” screen appears on your

iPhone.

• This system will be displayed as “Panasonic PMX100”*.

* To change the name, enter a new name to replace

the existing one.

You can also do the renaming after the network

connection is set up. (> 8, “To make network-related

settings”)

• You can set a password for this system under

“SPEAKER PASSWORD”.

(You will need this password if you make network

settings by Internet browser next time.)

6 Select “Next” to apply the settings.

• On the main unit’s display, “Success” appears when

the connection is established. (“ ” will be

displayed.)

• The following explanations are based on a

smartphone.

1 Press [RADIO, EXT-IN] on the remote control

repeatedly to select “Network”.

2 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

3 Press [3, 4] on the remote control to select

“Manual” and then press [OK].

4 Press [2, 1] on the remote control to select

“OK? Yes” and then press [OK].

• After pressing [OK] to confirm “OK? Yes”, the previous

network connection you have set with this unit will be

cleared.

“Setting” blinks on the display.

5 Go to Wi-Fi settings on your compatible device.

Wireless LAN connection

Method 1: “Using the WAC (Wireless

Accessory Configuration)” (> right)

• If you are using an iPhone/iPad/iPod touch (iOS

version 7.0 or later), or Mac (OS X 10.9 or later,

with AirPort Utility 6.3.1 or later), you can sent its

Wi-Fi configuration to this system.

Method 2: “Using an Internet browser”

(> right)

• You can access this unit’s network settings from

the Internet browser on your smartphone or PC,

etc.

Method 3: “Using WPS (Wi-Fi Protected

Setup™)” (> 7)

• If your wireless router supports WPS, you can set

up a connection by either pressing the WPS

button, or entering the WPS PIN code.

Wired LAN connection

Method 4: “Using a LAN cable” (> 8)

• You can make a stable connection to the network

with a LAN cable.

Wireless LAN connection

Method 1:

Using the WAC

(Wireless Accessory Configuration)

Settings

Wi-Fi settings

Method 2:

Using an Internet browser

Settings

Wi-Fi settings

SC-PMX100-100B_EGEBGN-RQT9995-3B.book 6 ページ２０１５年８月１２日　水曜日　午後２時３１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info