Bedienungsanleitung Panasonic SC-PMX100 (Seite 19 von 24) (Englisch)

618452

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT9995

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it is/

are not compatible with the system.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

The elapsed time shown is different from the actual

play time.

• Transfer the data to another USB device or backup the

data and reformat the USB device.

Pairing cannot be done.

• Check the Bluetooth

device condition.

The device cannot be connected.

• The pairing of the device was unsuccessful or the

registration has been replaced. Try pairing the device

again.

• This system might be connected to a different device.

Disconnect the other device and try pairing the device

again.

• If the problem persists, turn the unit off and on, then try

again.

The device is connected but audio cannot be heard

through this system.

• For some built-in Bluetooth

devices, you have to set

the audio output to “SC-PMX100” manually. Read the

operating instructions for the device for details.

The sound is interrupted.

• The device is out of the 10 m communication range.

Bring the Bluetooth

device closer to this system.

• Remove any obstacle between this system and the

device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.)

are interfering. Bring the Bluetooth

device closer to

this system and distance it from the other devices.

• Select “Mode 1” for stable communication. (> 11)

The One-Touch Connection (NFC feature) is not

working.

• Make sure the unit and the NFC feature of the device

are turned on. (> 11)

The PC does not recognise this system.

• Check your operating environment. (> 15)

• Restart the PC, turn off and on this system, and then

reconnect the USB cable.

• Use another USB port of the connected PC.

• Install the dedicated driver if using a PC with Windows.

Cannot find music files stored on the PC.

• When you playback music files over a network, those

that are not registered to its network server are not

displayed. For details, refer to the operating

instructions for your server. (> 21)

Cannot connect to the network.

• Confirm the network connection and settings. (> 6)

• If the network is set to be invisible, make the network

visible while you set up the network for this unit or

make a wired LAN connection. (> 8)

• This system’s Wi-Fi security supports WPA2™ only.

Your wireless router must therefore be WPA2™

compatible. For details on the security supported by

your router and how to change the settings, please

refer to the operating instructions or contact your

Internet service provider.

• Make sure that the multicast function on the wireless

router is enabled.

• Depending on the routers, WPS button may not work.

Try other methods. (> 6)

• Check the “Wireless LAN” setting. (> 17)

Cannot select this system as the output speakers.

• Make sure that the devices are connected to the same

network as this system.

• Reconnect the devices to the network.

• Turn the wireless router off and then on.

• Turn this system off and on, and then select this

system as the output speakers again.

Playback does not start.

The sound is interrupted.

• Adjust the orientation of the wireless LAN antenna on

the rear of the main unit.

• Try to place the speakers further away from the main

unit.

• If using the 2.4 GHz band on the wireless router,

simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions. Increase the distance

between this unit and these devices.

– If your wireless router supports 5 GHz band, try using

the 5 GHz band.

To change to the 5 GHz band, redo the network settings

using an Internet browser

(> 6). On the step 9, make

sure to select your network name (SSID) for the 5 GHz

band.

• Do not place this system inside a metal cabinet, for it

might block the Wi-Fi signal.

• Place this system closer to the wireless router.

• If several wireless devices are simultaneously using the

same wireless network as this system, try turning off the

other devices or reducing their wireless network usage.

• If the playback stops, check the playback status on the

device.

• Reconnect the devices to the network.

• Turn the wireless router off and then on.

• With some iOS and iTunes versions, it may not be

possible to restart the AirPlay playback if the selector is

changed (e.g., “CD”) or this system is turned off, during

the AirPlay playback. In this case, select a different

device from the AirPlay icon of the Music App or iTunes

and then re-select this system as the output speakers.

(> 10)

• Try a wired LAN connection. (> 8).

USB

Bluetooth

Network

SC-PMX100-100B_EGEBGN-RQT9995-3B.book 19 ページ２０１５年８月１２日　水曜日　午後２時３１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX100 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info