Bedienungsanleitung Panasonic SC-PMX70 (Seite 13 von 16) (Englisch)

618457

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQT9988

The device is connected but audio cannot be heard

through this system.

• For some built-in Bluetooth

devices, you have to set

the audio output to “SC-PMX70” manually. Read the

operating instructions for the device for details.

The sound is interrupted.

• The device is out of the 10 m communication range.

Bring the Bluetooth

device closer to this system.

• Remove any obstacle between this system and the

device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.)

are interfering. Bring the Bluetooth

device closer to

this system and distance it from the other devices.

• Select “MODE 1” for stable communication. (> 7)

The One-Touch Connection (NFC feature) is not

working.

• Make sure the unit and the NFC feature of the device

are turned on. (> 6)

“--:--”

• You connected the AC mains lead for the first time or

there was a power failure recently. Set the clock.

“ADJUST CLOCK”

• Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

• Play timer is not set. Adjust the play timer accordingly.

“AUTO OFF”

• The unit has been left unused for about 20 minutes

and will shut down in a minute. Press any button to

cancel it.

“CHECKING CONNECTION”

• The unit is checking the connected iPhone/iPad/iPod

or USB device.

• If this display keeps appearing, make sure that the

battery of the iPhone/iPad/iPod is not depleted and

that the iPhone/iPad/iPod is turned on and connected

correctly.

“ERROR”

• An incorrect operation was done. Read the instructions

and try again.

“F” (“  ” stands for a number.)

• There is a problem with this unit.

Write down the displayed number, disconnect the AC

mains lead and consult your dealer.

“NO DEVICE”

• The iPhone/iPad/iPod or USB device is not connected.

Examine the connection.

• The battery of the iPhone/iPad/iPod is depleted.

Charge the iPhone/iPad/iPod and turn it on before

connecting.

“NO DISC”

• You have not put in a disc or put in a disc that the

system cannot play.

“NO MEMORY” ([PMX70B])

• There are no preset DAB stations to select. Preset

some channels.

“NO PLAY”

• Examine the content. You can only play supported

format.

• The files in the USB device can be corrupted. Format

the USB device and try again.

• The unit may have a problem. Turn the unit off and

then on again.

“NO SIGNAL” ([PMX70B])

• This station cannot be received. Check your antenna.

“DEVICE NO RESPONSE”

“HUB NOT SUPPORTED”

“NOT SUPPORTED”

• You have connected an iPhone/iPad/iPod that cannot

be played.

• If the iPhone/iPad/iPod is compatible, turn it on and

connect it correctly.

• You have connected an unsupported USB device.

“PGM FULL”

• The number of programmed tracks is more than 24.

“PLAYERROR”

• You played an unsupported file. The system will skip

that track and play the next one.

“READING”

• The unit is checking the CD information. After this

display has disappeared, start operating.

“REMOTE ” (“  ” stands for a number.)

• The remote control and this unit are using different

codes. Change the code on the remote control.

– When “REMOTE 1” is displayed, press and hold [OK]

and [1] for at least 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK]

and [2] for at least 4 seconds.

“SCAN FAILED” ([PMX70B])

• Stations are not receivable. Check your antenna and try

DAB manual tuning.

“USB OVER CURRENT ERROR”

• The iPhone/iPad/iPod or USB device is drawing too

much power. Remove the iPhone/iPad/iPod or USB

device. Switch the system off and on again.

“VBR”

• The system cannot show the remaining play time for

variable bit rate (VBR) tracks.

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1 Disconnect the AC mains lead.

Wait 3 minutes before you continue with step 2.

2 While you press and hold [Í/I] on the main unit,

connect the AC mains lead again.

“- - - - - - - - - ” is shown.

3 Release [Í/I].

All the settings are set back to the factory default.

It is necessary to set the memory items again.

When other Panasonic equipment responds to the

remote control of this system, change the remote control

code for this system.

To set the code to “REMOTE 2”

1 Press [SELECTOR] on the main unit to select

“CD”.

2 Press and hold [SELECTOR] on the main unit

and [2] on the remote control until “REMOTE 2”

is shown.

3 Press and hold [OK] and [2] for a minimum of

4 seconds.

• The factory default is “REMOTE 1”.

• To change the mode back to “REMOTE 1”, repeat the

steps above but replace the button pressed on the

remote control from [2] to [1].

Main unit displays

Memory reset (initialisation)

Remote control code

SC-PMX70-70B_EGEBGN-RQT9988-B.book 13 ページ２０１４年１２月２９日　月曜日　午後１時２１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX70 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info