Bedienungsanleitung Panasonic SC-PMX82 (Seite 6 von 16) (Englisch)

663740

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TQBJ0999

About Bluetooth

Frequency band used

• This system uses the 2.4 GHz frequency band.

Certification of this device

• This system conforms to frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

• The actions below are punishable by law in some

countries:

- Taking apart or modifying this system.

- Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

equipped devices is not guaranteed.

• All devices must conform to standards set by Bluetooth

SIG, Inc.

• Depending on the specifications and settings of a

device, it can fail to connect or some operations can be

different.

• This system supports Bluetooth

security features. But

depending on the operating environment and/or

settings, this security is possibly not sufficient.

Transmit data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

device.

Range of use

• Use this device at a maximum range of 10 m.

The range can decrease depending on the

environment, obstacles or interference.

Interference from other devices

• This system may not function properly and troubles

such as noise and sound jumps may arise due to radio

wave interference if this system is located too close to

other Bluetooth

devices or the devices that use the

2.4 GHz band.

• This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals, laboratories,

etc).

Bluetooth

operations

By using the Bluetooth

connection, you can listen to the

sound from the Bluetooth

audio device from this system

wirelessly.

• Refer to the operating instructions of the Bluetooth

device for details.

Preparation

• Turn on the Bluetooth

feature of the device and place

the device near this unit.

1 Press [ ] to select “BLUETOOTH”.

If “PAIRING” is indicated on the display, go to step 3.

2 Press [PLAY MENU] to select “PAIRING” and

then press [OK].

Alternatively, press and hold

[ -PAIRING] on the

unit.

3 Select “SC-PMX82” or “SC-PMX80” from the

Bluetooth

device’s Bluetooth

menu.

The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may

be displayed before “SC-PMX82” or “SC-PMX80” is

displayed.

The name of the connected device is indicated on

the display for a few seconds.

4 Start playback on the Bluetooth

device.

1 Press [ ] to select “BLUETOOTH”.

“READY” is indicated on the display.

2 Select “SC-PMX82” or “SC-PMX80” from the

Bluetooth

device’s Bluetooth

menu.

The name of the connected device is indicated on

the display for a few seconds.

3 Start playback on the Bluetooth

device.

Note:

• If prompted for the passkey, input “0000”.

• You can register up to 8 devices with this unit. If a 9th

device is paired, the device that has not been used for the

longest will be replaced.

• This unit can only be connected to one device at a time.

• When “BLUETOOTH” is selected as the source, this unit

will automatically try and connect to the last connected

Bluetooth

device. (“LINKING” is indicated on the display

during this process.) If the connection attempt fails, try to

establish a connection again.

You can change the transmission mode to prioritise

transmission quality or sound quality.

Preparation

• Press [ ] to select “BLUETOOTH”.

• If a Bluetooth

device is already connected, disconnect

it.

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [2, 1] to select the mode and then press

[OK].

MODE 1: Emphasis on connectivity

MODE 2: Emphasis on sound quality

Note:

• Select “MODE 1” if the sound is interrupted.

• When enjoying video contents with this function, the video

and audio output may not be synchronised. In this case,

select “MODE 1”.

• The factory default is “MODE 2”.

Panasonic bears no responsibility for data and/or

information that is compromised during a

wireless transmission.

Connecting via Bluetooth

Pairing with Bluetooth

devices

Connecting a paired Bluetooth

device

Bluetooth

transmission mode

SC-PMX80-82-EGEBGN~TQBJ0999.book 6 ページ２０１７年４月１３日　木曜日　午後２時８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX82 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX82

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info