Bedienungsanleitung Panasonic SC-PMX90 (Seite 9 von 16) (Englisch)

734669

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TQBM0358

FM radio

30 FM stations can be preset.

Preparation

Press [RADIO, EXT-IN] repeatedly to select “FM”.

1 Press [RADIO MENU] to select “A.PRESET”.

2 Press [2, 1] to select “LOWEST” or

“CURRENT” frequency.

LOWEST:

To begin auto preset with the lowest frequency (FM

87.50).

CURRENT:

To begin auto preset with the current frequency.*

3 Press [OK] to start presetting.

• The tuner starts to preset all the stations it can receive

into the channels in ascending order.

To cancel, press [∫].

*1: To change the frequency, refer to “Manual tuning and

presetting”.

1 Press [6] or [5] to tune in to the station.

• Alternatively, press [:/6] or [5/9] on the

main unit when “MANUAL” is selected as the tune

mode*

To tune automatically, press and hold the button until

the frequency starts changing quickly.

2 Press [PROGRAM].

3 Press the numeric buttons to select a preset

number.

Do steps 1 through 3 again to preset more stations.

The new station replaces any station that occupies

the same preset number.

Press the numeric buttons, [:] or [9] to select

the preset station.

• Alternatively, press [:/6] or [5/9] on the main

unit when “PRESET” is selected as the tune mode*

*2: To change the tune mode

1 Press [RADIO MENU] repeatedly to select “TUNE

MODE”.

2 Press [2, 1] to select “MANUAL” or “PRESET”, and

then press [OK].

For Continental Europe:

Press [DISPLAY] repeatedly to select “FM STATUS”.

For others:

Press [DISPLAY].

Note:

• “STEREO” is displayed when this unit tunes to a stereo

broadcast.

(For Continental Europe only)

This system can show the text data transmitted by the

radio data system (RDS) available in some areas.

Press [DISPLAY] repeatedly.

Note:

• RDS is available only when stereo works in reception.

• RDS may not be available if reception is poor.

[PMX92] DAB/DAB+

Preparation

Press [RADIO, EXT-IN] repeatedly to select “DAB+”.

If you select “DAB+” for the first time, the system will

start the “DAB AUTO SCAN” procedure.

Note:

• If no station is detected, “SCAN FAILED” is shown.

Adjust the antenna and try again.

1 Press [RADIO MENU] to select “AUTOSCAN” and

then press [OK].

“START?” is shown.

2 Press [OK].

“DAB AUTO SCAN” is shown.

To find the best antenna position, use manual tuning to

search selected DAB/DAB+ frequency block.

1 Press [RADIO MENU] repeatedly to select

“MANUAL SCAN”.

2 Press [2, 1] to select a frequency block to scan

and then press [OK].

You can preset up to 20 DAB/DAB+ stations.

1 Press [6] or [5] to select a station.

• Alternatively, press [:/6] or [5/9] on the

main unit when “STATION” is selected as the tune

mode*

2 Press [PROGRAM].

3 Press the numeric buttons to select a preset

number.

Do steps 1 through 3 again to preset more stations.

Note:

• A station previously stored is overwritten when another

station is stored in the same preset number.

• You cannot preset a station when the station is not

broadcasting or when you have selected a secondary

service.

• Previous station memory is cleared during auto scan.

Press the numeric buttons, [:] or [9] to select

the preset station.

• Alternatively, press [:/6] or [5/9] on the main

unit when “PRESET” is selected as the tune mode*

*1: To change the tune mode

1 Press [RADIO MENU] repeatedly to select “TUNE

MODE”.

2 Press [2, 1] to select “STATION” or “PRESET”, and

then press [OK].

Automatic presetting

Manual tuning and presetting

Selecting a preset station

To display the current FM signal status

“FM ST”: FM stereo broadcast is being received.

“FM - - - -”: No broadcast is received or FM broadcast

received is weak or in monaural.

“FM MONO”:

You have set the “FM MODE” to

“MONO”.

(> 12, “If noise is excessive

during FM reception.”)

RDS broadcasting

“PS”: Programme service

“PTY”: Programme type

“FREQ”: Frequency

DAB/DAB+ auto scan

DAB/DAB+ manual tuning

Memory presetting

Selecting a preset station

SC-PMX90-92-EGEBGN~TQBM0358.book 9 ページ２０１９年１月１６日　水曜日　午後２時５５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX90 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info