Bedienungsanleitung Panasonic SC-PMX9DB (Seite 16 von 20) (Englisch)

563932

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

VQT4Z19

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult

your dealer for instructions.

Do you have the latest software installed?

• Occasionally, Panasonic may release updated

software for this system that may add or improve the

way a feature operates. (> 15)

No operations can be done with the remote control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the cause,

then switch the system on again. It can be caused by

straining of the speakers through excessive volume or

power, and when using the system in a hot environment.

A “humming” sound can be heard during playback.

• An AC mains lead or fluorescent light is near the

cables. Keep other appliances and cords away from

the cables of this system.

Display not shown correctly.

Playback does not start.

• You have not put in the disc correctly. Put it in correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or

non-standard.

• There is condensation. Let the system dry for 1 to 2 hours.

Reception is poor or a beat sound is heard.

• Keep the antenna away from computers, TVs, other

cables and cords.

• Use an outdoor antenna.

• Switch off the TV or move it away from the system.

You cannot switch on the iPod/iPhone/iPad.

• Examine that the battery of the iPod/iPhone/iPad is not

depleted.

• Switch off the iPod/iPhone/iPad and the system before

you connect the iPod/iPhone/iPad. Connect the iPod/

iPhone/iPad and try again.

No sound.

• Switch off the iPod/iPhone/iPad and remove from the

system. Connect the iPod/iPhone/iPad to the system

and switch it on and play it again.

iPod/iPhone/iPad does not charge.

• Examine the connection.

• Charging an iPod/iPhone/iPad whose battery is depleted:

- When using the “iPod_Port” connection, turn this system

on. Do not turn this system off until the iPod/iPhone/iPad

becomes operational.

- When using the “iPod_Dock” connection, “Checking

Connection” will be displayed until the iPod/iPhone becomes

operational, but this system will have begun charging.

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it is/

are not compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

The elapsed time shown is different from the actual

play time.

• Transfer the data to another USB device or backup the

data and reformat the USB device.

Pairing cannot be done.

• Check the Bluetooth

device condition.

The device cannot be connected.

• The pairing of the device was unsuccessful or the registration

has been replaced. Try pairing the device again.

• This system might be connected to a different device.

Disconnect the other device and try pairing the device again.

The device is connected but audio cannot be heard

through this system.

• For some built-in Bluetooth

devices, you have to set

the audio output to “SC-PMX9” manually. Read the

operating instructions for the device for details.

The sound is interrupted.

• The device is out of the 10 m communication range.

Bring the Bluetooth

device closer to this system.

• Remove any obstacle between this system and the

device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.)

are interfering. Bring the Bluetooth

device closer to

this system and distance it from the other devices.

• Select “Mode 1” for stable communication. (> 11)

Cannot connect to the network.

• Confirm the network connection and settings. (> 6)

• Your wireless network might be set to be invisible. In

this case select “Manual settings” in “Method 4”. (> 9)

• This system cannot join a wireless network using WEP

security settings with the WPS methods (“Method 1”).

Use “Method 4” to join the wireless network. (> 8)

• Make sure that the multicast function on the wireless

network router is set to on (enabled).

• When “D.Connect” is used, if the password for

“D.Connect” has been changed connect the other

device to this system using the new password. (> 10)

• Check that “Wireless LAN” is set to “On”. (> 15)

Cannot connect to this system.

• Display the wireless network name that this system is

connected to and make sure that the device is

connected to the same network. (> 6, 15)

• If “Net Standby” is set to “Off”, the AirPlay compatible

device cannot be connected when this system is off.

• Turn off the Wi-Fi setting on the AirPlay compatible

device, set “Net Standby” to “Off” (> 15) and then turn

this system off and on. Reconnect the compatible

device to the Wi-Fi network and then select this system

as the AirPlay speakers again.

My wireless network router is WPS PBC compatible,

but the pairing does not work.

• If the network is set to be invisible, the push button

configuration does not work. In this case, either make

the wireless network visible while you set up the

network for this system or use “Method 2”, “Method 3”

or “Method 4”. (> 7, 8)

Playback does not start.

The sound is interrupted.

• Try a wired LAN connection. (> 6).

• Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions.

Increase the distance between this system and these

devices.

• Do not place this system inside a metal cabinet, for it

might block the Wi-Fi signal.

• Place this system closer to the wireless network router.

• If “D.Connect” is set to “On”, place the AirPlay

compatible device closer to the speakers.

• If several wireless devices are simultaneously using the

same wireless network as this system, try turning off the

other devices or reducing their wireless network usage.

Common problems

Disc

Radio, DAB/DAB+

iPod/iPhone/iPad

USB

Bluetooth

AirPlay operations

SC-PMX9-VQT4Z19.book 16 ページ２０１３年３月２１日　木曜日　午後４時１６分

Panasonic SC-PMX9DB Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX9DB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info