Bedienungsanleitung Panasonic SC-PT250 (Seite 36 von 40) (Englisch)

67573

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

REFERENCE

RQT8043

RQTX0055

ENGLISH

For Southeast Asia and Thailand

For the Middle East, South Africa, Saudi Arabia, Kuwait and Continental Europe

Troubleshooting guide (continued)

■ Sound abnormal or improper Page

Sound is distorted.

• Noise may occur when playing WMA. —

Effects do not work.

• Some audio effects do not work or have less effect with some discs.

• Dolby Pro Logic II does not work if you have changed the play speed.

—

Humming is heard during play.

• An AC mains lead or ﬂ uorescent light is near the main unit. Keep other

appliances and cables away from the main unit.

—

No sound.

• There may be a slight pause in sound when you change the play speed.

• Audio may not be output due to how ﬁ les were created.

—

■ Picture abnormal or unviewable

The picture on the television is

not displayed correctly or

disappears.

• The unit and television are using different video systems.

Use a multi-system or NTSC television.

Use a multi-system or PAL television.

• The system used on the disc does not match your television.

– PAL discs cannot be correctly viewed on an NTSC television.

– This unit can convert NTSC signals to PAL 60 for viewing on a PAL

television (“NTSC DISC OUT” in “VIDEO” tab).

• Ensure that the unit is connected directly to the television, and is not

connected through a video cassette recorder.

• Mobile telephone chargers can cause some disturbance.

• If you are using an indoor television antenna, change to an outdoor antenna.

• The television antenna wire is too close to the unit. Move it away from the

unit.

• Change “SOURCE SELECT” in Functions menu.

—

Picture stops.

• Picture may stop if the DivX ﬁ les are greater then 2 GB. —

Picture size does not ﬁ t the

screen.

• Change “TV ASPECT” in the “VIDEO” tab.

• Use the television to change the aspect.

• Change the zoom setting. (“ZOOM” in Functions menu)

—

Menu is not displayed correctly.

• Restore the zoom ratio to “NORMAL”. (“ZOOM” in Functions menu) 22

Auto zoom function does not

work well.

• Turn off television zoom function.

• Zoom function may not work well, especially in dark scenes and may not

work depending on the type of disc.

—

When playing PAL disc, picture

is distorted.

• Set “TRANSFER MODE” in Functions menu to “AUTO”. 22

■ Progressive video

Pictures not in progressive

output.

• Select “PROGRESSIVE” in “VIDEO OUT (I/P)” in the “VIDEO” tab.

• The unit’s VIDEO OUT terminal outputs the interlaced signal even if “PRG” is

displayed.

■ Unit displays

The display is dark.

• Select “BRIGHT” in “FL DIMMER” in the “OTHERS” tab. 25

“NO PLAY”

• You inserted a disc the unit cannot play; insert one it can.

• You inserted a blank disc.

• You inserted a disc that has not been ﬁ nalized.

—

“NO DISC”

• You have not inserted a disc; insert one.

• You have not inserted the disc correctly; insert it correctly.

—

“OVER CURRENT ERROR”

• The USB device is drawing too much power. Switch to DVD/CD mode,

remove the USB and turn the unit off.

—

“F61”

• Check and correct the speaker cable connections.

If this does not ﬁ x the problem, consult the dealer.

“F76”

• There is a power supply problem. Consult the dealer. —

“DVD U11”

• Disc may be dirty. Wipe it clean. 26

“ERROR”

• Incorrect operation performed. Read the instructions and try again. —

“DVD H & &”

“DVD F & & &”

& stands for a number.

• Trouble may have occurred. The numbers following “H” and “F” depend on

the status of the unit. Turn the unit off and then back on. Alternatively, turn the

unit off, disconnect the AC mains lead, and then reconnect it.

• If the service numbers fail to clear, note the service number and contact a

qualiﬁ ed service person.

—

“REMOTE 1” or “REMOTE 2”

• Match the modes on the main unit and remote control. Depending on

the number being displayed (“1” or “2”), press and hold [ENTER] and the

corresponding numbered button ([1] or [2]) for at least 2 seconds.

RQTX0055-B_Out_new14.indd 36RQTX0055-B_Out_new14.indd 36 3/16/07 6:48:59 PM3/16/07 6:48:59 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PT250 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PT250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info