Bedienungsanleitung Panasonic sc pt450 (Seite 36 von 40) (Englisch)

371007

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

REFERENCE

RQT8043

RQTX0066

ENGLISHENGLISH

7 Progressive video Page

There is ghosting when

progressive or HDMI output is on.

• This problem is caused by the editing method or material used on DVD-Video,

but should be corrected if you use interlaced output. Set “Video Output Mode” in

Picture Menu to “480i” or “576i”. (Alternatively, press and hold [CANCEL] to switch

to “480i” or “576i”.)

• Disable the HDMI AV OUT connection and use other video connections. Make the

settings in the following order:

1 Set “Video Mode” in the “HDMI” tab to “Off”.

2 Set “Video Output Mode” in Picture Menu to “480i” or “576i”. (Alternatively, press

and hold [CANCEL] to switch to “480i” or “576i”.)

Pictures not in progressive output.

• Select “480p” or “576p” in “Video Output Mode” in Picture Menu.

• The unit’s VIDEO OUT terminal outputs an interlaced signal even if “PRG” is

displayed.

Closed captions not displayed.

• When HDMI or progressive output is on, closed captions will not be displayed. —

7 Unit displays

The display is dark.

• Select “Bright” in “FL Dimmer” in the “Others” tab. 25

“NO PLAY”

• You inserted a disc the unit cannot play; insert one it can.

• You inserted a blank disc.

• You inserted a disc that has not been ﬁ nalized.

—

“NO DISC”

• You have not inserted a disc; insert one.

• You have not inserted the disc correctly; insert it correctly.

—

“F61”

• Check and correct the speaker cable connections.

If this does not ﬁ x the problem, consult the dealer.

“F76”

• There is a power supply problem. Consult the dealer. —

“DVD U11”

• Disc may be dirty. Wipe it clean. 26

“ERROR”

• Incorrect operation performed. Read the instructions and try again. —

“DVD H & &”

“DVD F & & &”

& stands for a number.

• Trouble may have occurred. The numbers following “H” and “F” depend on the

status of the unit. Turn the unit off and then back on. Alternatively, turn the unit off,

disconnect the AC mains lead, and then reconnect it.

• If the service numbers fail to clear, note the service number and contact a qualiﬁ ed

service person.

—

“U70 &”

& stands for a number.

The actual number following “U70”

will depend on the state of the main

unit.

• The HDMI connection acts unusually.

– The connected equipment is not HDMI-compatible.

– The HDMI cable is too long.

– The HDMI cable is damaged.

—

“REMOTE 1” or “REMOTE 2”

• Match the modes on the main unit and remote control. Depending on the number

being displayed (“1” or “2”), press and hold [ENTER] and the corresponding

numbered button ([1] or [2]) for at least 2 seconds.

7 Television displays

“”

• The operation is prohibited by the unit or disc. —

“Cannot play group xx, content xx”

“Cannot display group xx, content

xx”

• You are trying to display an incompatible group or content. —

“Group xx, content xx is

protected”

• You are trying to play a protected group or content. You cannot play it. —

“Check the disc”

• This disc may be dirty. —

“This disc may not be played in

your region”

• Only DVD-Video discs that include or have the same region number as the one on

the rear panel of this unit can be played.

Cover

page

No on-screen display.

• Select “On” in “On-Screen Messages” in the “Display” tab. 25

Main unit’s screen saver remains.

• When using the HDMI connection, audio/video information is continually

transferred between the main unit and the television regardless of which source

has been selected on the main unit. This is normal.

—

7 Listening to the radio

Distorted sound or noise is heard.

“ST” ﬂ ickers or does not light.

• Adjust the position of the FM antenna.

• Use an outdoor antenna.

—

A beat sound is heard.

• Turn the television off or move it away from the unit. —

Troubleshooting guide (continued)

RQTX0066-L_new12.indd 36RQTX0066-L_new12.indd 36 3/21/07 9:58:51 AM3/21/07 9:58:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc pt450 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc pt450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info