618617
11
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
11
Simple Setup
Digital transmitter connection / AC cord connections / Preparing the remote control
11
RQTX0105
Conserving power
The main unit and the wireless system consume a small amount of
power when they are turned off (main unit: approx. 0.3 W, wireless
system: approx. 0.2 W). To save power when they are not to be used for
a long time, unplug them from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.
[Note]
The included AC power supply cords are for use with the main unit and
wireless system only. Do not use them with other equipment. Also, do
not use cords for other equipment with the main unit or wireless system.
Batteries
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not:
mix old and new batteries.
use different types at the same time.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor ( 15), avoiding obstacles,
at a maximum range of 7.0 m (23 ft) directly in front of the unit.
step
4 Digital transmitter connection
TRANSMITTER
DIGITAL
Do not insert or remove while
the main unit is on.
Digital transmitter
Insert fully until you hear a click.
Main unit
step
5 AC cord connections
L
R
FM ANT
(75 )
P
B
Y
AUX
COMPONENT VIDEO OUT
R
P
VIDEO OUT
AC IN
LOOP ANT
G
AM ANT
EXT
LOOP
LOOP
OPTION V.1
AC IN
AC power supply cord
(included)
To household
AC outlet
(AC 120 V, 60 Hz)
Main unitWireless system
To household
AC outlet
(AC 120 V, 60 Hz)
AC power supply cord
(included)
step
6 Preparing the remote control
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
R6/LR6, AA
Insert so the poles (i and j) match those in the remote control.
Press in and lift up.
Replace the cover.
SC-PT760-960P-PC_Body2_Eng.fm Page 11 Tuesday, December 11, 2007 10:50 AM
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SC-PT760 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info