Bedienungsanleitung Panasonic sc pt850 (Seite 40 von 48) (Englisch)

370931

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

OTHER OPERATIONS

ENGLISH

RQT8043

RQTX0038

Operating other equipment (continued)

Operating the televisionOperating the television

You can use the remote control to operate a Panasonic

television.

Aim the remote control at the television.

To switch the television on or off

To switch the television’s video input mode

Adjust the volume

To play audio from your television through your home

theater system

Preparation

Connect your equipment referring to “Connect to the

various television terminals” (\ page 13).

Press [EXT-IN] to select “AV

”/“AUX” as the source. Then

reduce the volume on the television to its minimum, and

control the volume on this main unit.

Note

• The remote control may not work properly with some models.

•

You can enjoy 5.1-channel surround sound when you turn on

Super Surround (MOVIE, MUSIC) (\ page 33).

Operating the cable TV box, digital broadcasting or satellite receiverOperating the cable TV box, digital broadcasting or satellite receiver

This unit can decode the surround signals received through

cable TV box, digital broadcasting or satellite broadcasts.

Refer to your equipment’s operating instructions for details.

Only Dolby Digital and PCM can be played with this

connection.

To DIGITAL OUT

Optical digital audio cable (not included)

• Do not bend sharply when connecting.

OPTICAL

Rear panel of

this main unit

To select “D-IN” (Digital In) as the source, press

several times.

USB  AV

 AUX

 D-IN (Digital In)

MUSIC P.

When you select “D-IN” as the source, you can select

the following sound effects. (These functions only work

with Dolby Digital or PCM, excluding Audio Mode, which

only works with Dolby Digital Dual Mono.)

PCM FIX Mode

Press and hold [3].

(remote control)

PFIX ON: Select when receiving only PCM signals.

PFIX OFF (factory preset): Select when receiving Dolby

Digital and PCM signals.

Dynamic Range Compression

Press and hold [2 ].

DRC ON: Adjusts for clarity even when the volume is low

by compressing the range of the lowest sound

level and the highest sound level. Convenient for

late night viewing. (Only works with Dolby Digital)

DRC OFF (factory preset)

Audio Mode

Press and hold [5].

AUDIO ST, AUDIO L, AUDIO R (“AUDIO L” and “AUDIO R”

only appear when the signal is Dolby Digital Dual Mono.)

Dolby Pro Logic II (\ page 33)

Press [ŸPLII].

Note

Audio that is input through the OPTICAL IN terminal cannot be

output through the HDMI terminal.

Changing the main unit and remote controlChanging the main unit and remote control

The remote control and main unit are factory-set to

“REMOTE 1” mode.

If your remote control affects other equipment during

operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1 While pressing and holding [ ] on the main unit

“REMOTE 2” appears on the main unit display.

2 To operate in “REMOTE 2” mode

(Press and hold for 2 seconds)

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both

steps. (“REMOTE 1” appears on the main unit during step

1.)

The remote control cannot work with the main unit if

their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit

display when you operate the remote control.

• If “REMOTE 1” appears (The main unit is in “REMOTE 1”

mode.)

Press and hold [ENTER] and [1] on the remote control for

at least 2 seconds.

• If “REMOTE 2” appears (The main unit is in “REMOTE 2”

mode.)

Press and hold [ENTER] and [2] on the remote control for

at least 2 seconds.

Note

You can still operate a television using the remote control

(\ see above) even after switching the mode.

For Continental Europe

RQTX0038-3B.indd 40RQTX0038-3B.indd 40 4/2/07 1:46:22 PM4/2/07 1:46:22 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc pt850 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc pt850

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info