Bedienungsanleitung Panasonic SC-PT960 (Seite 23 von 44) (Englisch)

618618

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Changing the player settings

RQTX0105

∫ “VIDEO” menu

∫ “AUDIO” menu

§4

Refer to “Frame still and field still” (➜ 37, Glossary).

§5

When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend

on the performance of this connected equipment.

(Continued on next page)

QUICK SETUP enables successive settings of the items in the shaded area.

TV ASPECT

Choose the setting to suit your TV and

preference.

≥ 4:3PAN&SCAN: Regular aspect TV (4:3)

The sides of the widescreen picture are cut off so it fills the screen (unless

prohibited by the disc).

≥ 4:3LETTERBOX: Regular aspect TV (4:3)

Widescreen picture is shown in the letterbox style.

≥ 4:3ZOOM: Regular aspect TV (4:3)

The picture zooms in and out.

≥ 16:9NORMAL: Widescreen TV (16:9)

Laterally stretches image.

≥ 16:9SHRINK: Widescreen TV (16:9)

Images appear at the center of the screen.

≥ 16:9ZOOM: Widescreen TV (16:9)

Expands to 4:3 aspect ratio.

TV TYPE

Select to suit the type of TV.

≥ STANDARD ≥ CRT ≥ LCD

≥ PROJECTION ≥ PLASMA

TIME DELAY

When connected with a Plasma display,

adjust if you notice the audio is out of

sync with the video.

≥ 0 ms/AUTO

≥ 20 ms ≥ 40 ms ≥ 60 ms ≥ 80 ms ≥100 ms

When using VIERA Link “HDAVI Control” with “HDAVI Control 3” compatible TV (➜ 26), select “0 ms/AUTO”.

Audio and video will automatically be set in sync. (This works only when

“

DVD/CD

” is selected as the source.)

STILL MODE

Specify the type of picture shown when

paused.

≥ AUTO

≥ FIELD

§4

: The picture is not blurred, but picture quality is lower.

≥ FRAME

§4

Overall quality is high, but the picture may appear blurred.

BLACK LEVEL

Change the black level of the picture.

≥ LIGHTER

≥ DARKER

VIDEO OUT (I/P)

Select “PROGRESSIVE” only if

connecting to a progressive output

compatible TV.

≥ INTERLACE

≥ PROGRESSIVE: A message screen will appear. Follow the on-screen instructions.

DOLBY DIGITAL

≥ BITSTREAM

≥ PCM

Select to suit the type of equipment you connected to the HDMI AV OUT

terminal.

Select “BITSTREAM” when the equipment can decode the bitstream (digital

form of 5.1 channel data). Otherwise, select “PCM”.

(If the bitstream is output to the equipment without a decoder, high levels of

noise can be output and may damage your speakers and hearing.)

DTS

≥ BITSTREAM

≥ PCM

DYNAMIC RANGE

≥ ON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with

Dolby Digital)

≥ OFF

SPEAKER SETTINGS

Make settings for your speakers.

≥ SETTINGS:

≥ C DELAY: 0ms

, 1ms, 2ms, 3ms, 4ms, 5ms

Select the delay time for your center speaker (➜ 25, Selecting the delay time of the speakers).

≥ SL/SR DELAY: 0ms

, 5ms, 10ms, 15ms

Select the delay time for your surround speakers (➜ 25, Selecting the delay time of the speakers).

≥TEST TONE: SETTING

Use the test tone for speaker level adjustments (➜ 29, Adjusting the speaker level).

≥CENTER, SURROUND RIGHT, SURROUND LEFT: `6dB to i6 dB (Factory preset: 0 dB

)

SC-PT760-960P-PC-RQTX0105-P_eng.book Page 23 Tuesday, December 4, 2007 4:10 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PT960 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info