Bedienungsanleitung Panasonic sc rt 70 (Seite 53 von 68) (Englisch)

370688

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

RQT8672

Resetting channel setting

You can add or delete channels, or change programme

positions.

1 While stopped

Press [FUNCTIONS].

2 Press [3, 4] to select “To Others”

and press [ENTER].

3 Press [3, 4] to select “Setup” and

press [ENTER].

4 Press [3, 4] to select “Tuning” and

press [1].

5 Press [3, 4] to select “Manual” and

press [ENTER].

To delete a programme position

Press [3, 4, 2, 1] to select a programme position and

press [A].

To add a blank programme position

Press [3, 4, 2, 1] to select a programme position and

press [B].

To move a TV station to another programme position

1 Press [3, 4, 2, 1] to select a programme position and

press [C].

2 Press [3, 4, 2, 1] to select the new programme

position to which you want to assign the TV station and

press [ENTER].

[Note]

When the unit connected to a Q Link-compatible TV with a

fully wired 21-pin Scart lead sets itself automatically (➡ 18),

only deletion of the programme position can be performed.

After performing steps 1–5

6 Press [3, 4, 2, 1] to select a

programme position and press

[ENTER].

e.g.

Press [3, 4] to select an item and press [1].

OPEN/CLOSE



VIDEO Pl

RETURN

FUNCTIONS

3,4,2,1

ENTER

Numbered

buttons

Setup

Disc

Picture

Sound

Display

Connection

Tuning

Manual

Auto-Setup Restart

Download from TV

Others

ENTER

RETURN

TAB

SELECT

Manual Tuning

Pos

Name

Pos

Name

Delete

Add

Move

1 BBC1 22

2 BBC2 23

3 ITV 24

4 CH4

5 CH5

ENTER

RETURN

SELECT

To change detailed station settings

Pos To change the programme position in

which the TV stations are assigned

Press [3, 4] or numbered buttons to select

the number of the desired programme

position and press [ENTER].

Name To enter or change the name of a TV

station

Press [3, 4, 2, 1] to enter station name

and press [ENTER].

If the station name needs a blank space,

select the blank between “Z” and “¢”.

Channel To enter newly available TV stations or

change the channel number of an already

tuned TV station

Press [3, 4] or the numbered buttons to

enter the channel number of the desired TV

station.

Wait a few moments until the desired TV

station has been tuned.

After the desired TV station is tuned, press

[ENTER].

NICAM To select the type of sound to be

recorded

Press [3, 4] to select “Auto” and press

[ENTER].

≥Select “Off” if you want to record the

normal (mono) sound during a stereo,

bilingual or NICAM broadcast, or if the

stereo sound is distorted due to inferior

reception conditions.

Title Page To enter the Teletext title page for a

channel

Entering title page number allows the unit to

automatically record programme and station

names.

Press [3, 4] or numbered buttons to enter

the number and press [ENTER].

≥To find the correct title page for the station,

refer to its Teletext TV guide.

≥The unit’s clock must be set correctly.

Pos

Name

Channel

NICAM

Title Page

301

Auto

RETURN : leave

Manual

Tuning

BBC1

RETURN

SELECT

Changing the unit’s settings / Resetting channel setting

RT70-30.book Page 53 Thursday, April 13, 2006 1:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc rt 70 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc rt 70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info