Bedienungsanleitung Panasonic SC-XH70 (Seite 8 von 26) (Englisch)

502225

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

RQT9596

Conserving power

The main unit consumes a small amount of power, even when it is in

standby mode (approx. 0.4 W). To save power when the unit is not to be

used for a long time, unplug it from the household AC outlet.

You will need to reset some memory items when plugging back the main

unit.



The supplied AC power supply cord is for use with the main unit only.

Do not use it with other equipment. Also, do not use cords from other

equipment with the main unit.

Aim at the remote control signal sensor (B 4), avoiding obstacles.

Distance: Within approx. 7 m (23 ft)

Angle: Within approx. 20° up and down, approx. 30° to the left and right

The Easy setup screen assists you in making necessary

settings.



≥ You can perform this setup anytime by selecting “Easy setup” in the Setup

menu. (B 17)

≥ If this unit is connected to a “HDAVI Control 3 or later” compatible TV via

HDMI cable, the menu language and TV aspect information will be retrieved

via VIERA Link.

≥ If this unit is connected to a “HDAVI Control 2” compatible TV via HDMI cable,

the menu language information will be retrieved via VIERA Link.

step 3 AC power supply cord connection

step 4 Preparing the remote control

≥ Use alkaline or manganese batteries.

Use

AC IN

Main unit (rear)

AC power supply cord

(supplied)

To household AC outlet

(AC 120 V, 60 Hz)

R6/LR6, AA







Press in and lift up.

Replace the cover.

Insert so the poles (r and j) match those in the remote control.

step 5 Easy setup

Preparation

Turn on your TV and select the appropriate video input mode

(e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit.

≥ To change your TV’s video input mode, refer to its operating

instructions.

≥ This remote control can perform some basic TV operations (B 4).

Press [Í]1 to turn on the unit.

≥ The Easy setup screen appears automatically.

Press [3, 4]8 to select “Yes” and press [OK]8.

Follow the messages and make the settings with

[3, 4, 2, 1]8 and [OK]8.

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speaker layout

Select “Surround layout (Recommended)” mode or “Front layout

(Alternative)” mode according to your speaker layout

(B 6, Positioning).

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥Speaker output

Make surround sound setting for speaker output.

≥TV audio

Select the audio input connection from your TV.

For AUX connection (B 7): Select “AUX”.

For HDMI connection (B 7): Select “ARC”.

For DIGITAL AUDIO IN OPTICAL connection (B 7): Select

“DIGITAL IN”.

This will be the TV audio setting for VIERA Link “HDAVI Control”.

(B 14)

Press [OK]8 to finish the “Easy setup”.

SC-XH70 PPC_eng.book Page 8 Tuesday, December 27, 2011 9:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-XH70 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-XH70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info