Bedienungsanleitung Panasonic SC-XH70 (Seite 16 von 26) (Englisch)

502225

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

RQT9596

Getting StartedPlaying DiscsOther OperationsReference

Select to suit the type of equipment you connected to the HDMI AV OUT

terminal.

Select “Bitstream” when the equipment can decode the bitstream (digital

form of 5.1-channel data). Otherwise, select “PCM”.

(If the bitstream is output to the equipment without a decoder, high levels

of noise can be output and may damage your speakers and hearing.)

Digital Output

When audio output is from HDMI AV OUT terminal, and the connected

equipment does not support the item selected, the actual output will

depend on the performance of this connected equipment.

Time Delay

When connected with a Plasma display, adjust if you notice the audio is

out of sync with the video.

≥ 0ms/Auto

≥ 20ms ≥ 40ms ≥ 60ms

≥ 80ms ≥ 100ms

When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later”

compatible TV (B 14), select “0ms/Auto”.

Audio and video will automatically be set in sync.

Video Resolution

This works only when the HDMI connection is being used.

Select suitable picture quality for your TV.

(Video recordings will be converted to, and output as, high-definition

video.)

≥ Auto

≥ 480i ≥ 480p ≥ 720p

≥ 1080i ≥ 1080p

Ensure that your TV can support the resolution that you choose.

If a message screen appears, confirm your selection by pressing

[2, 1]8 to select “Yes” and press [OK]8. If the picture is distorted, wait

for 15 seconds or press [2, 1]8 to select “No”. To accept the setting,

select “Yes” again.

HD JPEG Mode [JPEG]

(This works only when using HDMI connection with “Video Resolution”

(B above) set to “Auto”, “720p”, “1080i” or “1080p”.)

≥ On

: HD JPEG playback is available. (JPEG images will be displayed

in original resolution.)

≥ Off

During HD JPEG playback, there will be no on-screen menus (B 13) and

on-screen displays.

Black Level

(This works only for video output from the VIDEO OUT terminal.)

Change the black level of the picture.

≥ Lighter

≥ Darker

Audio menu

≥ Bitstream ≥ PCM

Dynamic Range

≥ On: Adjusts for clarity even when the volume is low. Convenient for

late night viewing. (Only works with Dolby Digital)

≥ Off

: The full dynamic range of the signal is reproduced.

Speaker Settings

Select the delay time of the speakers.

(Effective only when “Surround layout (Recommended)” mode is selected

in “Speaker layout” (B 8, Easy setup).)

(Center and surround speakers only)

For optimum listening with 5.1-channel sound, all the speakers, except for

the subwoofer, should be the same distance from the seating position.

If you have to place the center or surround speakers closer to the seating

position, adjust the delay time to make up for the difference.

If either distance a or b is less than c, find the difference in the table

and change to the recommended setting.

a Center speaker b Surround speaker

Difference (Approx.) Setting Difference (Approx.) Setting

30 cm (1 foot) 1ms 150 cm (5 feet) 5ms

60 cm (2 feet) 2ms 300 cm (10 feet) 10ms

90 cm (3 feet) 3ms 450 cm (15 feet) 15ms

120 cm (4 feet) 4ms

150 cm (5 feet) 5ms

≥ C Delay (Center Delay):

0ms

, 1ms, 2ms, 3ms, 4ms, 5ms

Select the delay time for your center speaker.

≥ LS/RS Delay (Left Surround/Right Surround Delay):

0ms

, 5ms, 10ms, 15ms

Select the delay time for your surround speakers.

≥ Test To ne:

Use the test tone to listen to the speaker output to confirm speaker

connections.

Test tone will be output to each channel in the following order.

Left, Center, Right, Surround Right, Surround Left, Subwoofer

To stop the test tone, press [RETURN]D.

HDMI menu

VIERA Link

≥ On: The VIERA Link “HDAVI Control” function is available (B 14).

≥ Off

Audio Out

≥ On: When audio output is from the HDMI AV OUT terminal.

(Depending on the capabilities of the connected equipment,

audio output may differ from the audio settings of the main unit.)

≥ Off

: When audio output is not from the HDMI AV OUT terminal. (The

audio is output using the settings of the main unit.)

Power Off Link

Select the desired power off link setting of this unit for VIERA Link operation

14). (This works depending on the settings of the connected

VIERA Link

“HDAVI Control”

compatible equipment.)

≥ Video/Audio: When the TV is turned off, this unit will turn off

automatically.

≥ Video: When the TV is turned off, this unit will turn off except during the

following conditions:

– audio playback ([CD] [MP3])

– radio mode

– “AUX”, “ARC” or “D-IN” mode (non-selected TV audio setting

for

VIERA Link

)

– “MUSIC P.” mode

TV Audio

Select the TV audio input to work with the

VIERA Link

operations (B 14).

≥ AUX

≥ ARC

≥ DIGITAL IN











Actual speaker position

Ideal speaker position

Primary listening

distance

Approximate room dimensions

Circle of constant primary listening distance

SC-XH70 PPC_eng.book Page 16 Tuesday, December 27, 2011 9:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-XH70 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-XH70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info