Bedienungsanleitung Panasonic SC-XH70 (Seite 17 von 94) (Polnisch)

502225

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

RQT9594

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Video Out-SCART

Choose the video signal format to be output from the SCART (AV)

terminal.

≥ Video

≥ S-Video

≥ RGB 1: (Only when connected to a RGB compatible TV)

If you always would like to view the picture from the unit in RGB signal,

select this mode. The TV screen will automatically switch to display the

picture from the unit when the unit is turned on.

≥ RGB 2: (Only when connected to a RGB compatible TV)

When in TV tuner mode, if the selector is set to “DVD/CD”, the TV

screen will automatically switch to display the picture from the unit only

during disc playback ([DVD-V] [VCD]) or when viewing on-screen menu of

DVD/CD.

The TV picture will be displayed when the selector is set to “AV”. With

other selectors, the picture from this unit will be displayed.

Select to suit the type of equipment you connected to the HDMI AV OUT

terminal.

Select “Bitstream” when the equipment can decode the bitstream (digital

form of 5.1-channel data). Otherwise, select “PCM”.

(If the bitstream is output to the equipment without a decoder, high levels

of noise can be output and may damage your speakers and hearing.)

Digital Output

When audio output is from HDMI AV OUT terminal, and the connected

equipment does not support the item selected, the actual output will

depend on the performance of this connected equipment.

Time Delay

When connected with a Plasma display, adjust if you notice the audio is

out of sync with the video.

≥ 0ms/Auto

≥ 20ms ≥ 40ms ≥ 60ms

≥ 80ms ≥ 100ms

When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later”

compatible TV (B 15), select “0ms/Auto”.

Audio and video will automatically be set in sync.

TV System

Choose the appropriate output source when connecting to a TV

(B 19, Video systems).

≥ NTSC: When connected to an NTSC TV.

≥ PAL

: When connected to a PAL TV.

≥ Auto: Selects the original output source when playing PAL or NTSC

discs.

Video Resolution

This works only when the HDMI connection is being used.

Select suitable picture quality with your TV.

(Video recordings will be converted to, and output as, high-definition

video.)

≥ Auto

≥ 480i/576i ≥ 480p/576p ≥ 720p

≥ 1080i ≥1080p

Ensure that your TV can support the resolution that you choose.

If a message screen appears, confirm your selection by pressing

[2, 1]8 to select “Yes” and press [OK]8. If the picture is distorted, wait

for 15 seconds or press [2, 1]8 to select “No”. To accept the setting,

select “Yes” again.

HD JPEG Mode [JPEG]

(This works only when using HDMI connection with “Video Resolution”

(B above) set to “Auto”, “720p”, “1080i” or “1080p”.)

≥ On

: HD JPEG playback is available. (JPEG images will be displayed in

original resolution.)

≥ Off

During HD JPEG playback, there will be no on-screen menus (B 14) and

on-screen displays.

Audio menu

≥ Bitstream ≥PCM

Dynamic Range

≥ On: Adjusts for clarity even when the volume is low. Convenient for

late night viewing. (Only works with Dolby Digital)

≥ Off

: The full dynamic range of the signal is reproduced.

Speaker Settings

Select the delay time of the speakers.

(Effective only when “Surround layout (Recommended)” mode is selected

in “Speaker layout” (B 9, Easy setup).)

(Center and surround speakers only)

For optimum listening with 5.1-channel sound, all the speakers, except for

the subwoofer, should be the same distance from the seating position.

If you have to place the center or surround speakers closer to the seating

position, adjust the delay time to make up for the difference.

If either distance a or b is less than c, find the difference in the table

and change to the recommended setting.

a Center speaker b Surround speaker

Difference (Approx.) Setting Difference (Approx.) Setting

30 cm 1ms 150 cm 5ms

60 cm 2ms 300 cm 10ms

90 cm 3ms 450 cm 15ms

120 cm 4ms

150 cm 5ms

≥ C Delay (Center Delay):

0ms

, 1ms, 2ms, 3ms, 4ms, 5ms

Select the delay time for your center speaker.

≥ LS/RS Delay (Left Surround/Right Surround Delay):

0ms

, 5ms, 10ms, 15ms

Select the delay time for your surround speakers.

≥ Test Tone:

Use the test tone to listen to the speaker output to confirm speaker

connections.

Test tone will be output to each channel in the following order.

Left, Center, Right, Surround Right, Surround Left, Subwoofer

To stop the test tone, press [RETURN]D.

HDMI menu

VIERA Link

≥ On: The VIERA Link “HDAVI Control” function is available (B 15).

≥ Off

Audio Out

≥ On: When audio output is from the HDMI AV OUT terminal.

(Depending on the capabilities of the connected equipment,

audio output may differ from the audio settings of the main unit.)

≥ Off

: When audio output is not from the HDMI AV OUT terminal. (The

audio is output using the settings of the main unit.)

Power Off Link

Select the desired power off link setting of this unit for VIERA Link

operation (B 15). (This works depending on the settings of the connected

VIERA Link “HDAVI Control” compatible equipment.)

≥ Video/Audio

: When the TV is turned off, this unit will turn off

automatically.

≥ Video: When the TV is turned off, this unit will turn off except during the

following conditions:

– audio playback ([CD] [MP3])

– radio mode

– “AV”, “AUX” or “ARC” mode (non-selected TV audio setting

for VIERA Link)

TV Audio

Select the TV audio input to work with the VIERA Link operations (B 15).

≥ AUX

≥ ARC

≥ AV











Actual speaker position

Ideal speaker position

Primary listening

distance

Approximate room dimensions

Circle of constant primary listening distance

SC-XH70-75 EP_RQT9594-R_eng.book Page 17 Wednesday, December 14, 2011 9:05 AM

Panasonic SC-XH70 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-XH70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info