419481
24
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
RQT9472
24
Functions and settings
To return to the previous
display/To cancel during setting
operation: Press [
RETURN].
Play
Functions and settings
Setting distances
You can make this setting when using the surround speakers.
This setting is not displayed under different conditions.
By setting the distance from front/surround speakers to the listening-viewing position, the
sound delay time is automatically calculated and adjusted so that sound reaches the listener
at the same time.
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. (
page 23)
2. Press [
w
][
q
] to select “DISTANCE ” and press [OK].
3. Press [
w
][
q
] to select a speaker to set and press [OK].
FRONT : Front speakers
SURR : Surround speakers
4. Press [
e
][
r
] to select the distance and press [OK].
Adjustment range: 1.0 to 10.0 m
Factory setting : Front 3.0 m
Surround 1.5 m
5. Press [ RETURN] several times to select “EXIT ” and press
[OK] to nish the setting.
Radio waves from this system reach maximum range of 15 m within the same room.
Setting 7.1-channel virtual surround
When playing back 7.1-channel LPCM signals, you can enjoy wider sound eld effects as if
another speaker is added. Factory setting is “AUTO ”.
When you do not want to use 7.1-channel virtual surround effect, select OFF in this setting.
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. ( page 23)
2. Press [
w
][
q
] to select “7.1CH VS ” and press [OK].
3. Press [
e
][
r
] to select “OFF ” and press [OK].
AUTO : The setting is switched between ON and OFF depending on the input
signals.
Only when 7.1-channel LPCM signals are input, 7.1-channel virtual surround
is ON (When other signals are input, this setting is OFF.).
OFF : 7.1-channel virtual surround is always OFF.
Factory setting : AUTO
4. Press [ RETURN] several times to select “EXIT ” and press
[OK] to nish the setting.
Reducing standby power consumption
(In standby condition (HDMI off mode))
Standby through function (
pages 10 and 30) does not work in this mode if you have
connected through the HDMI terminal.
VIERA Link “HDAVI Control” (
page 20) will not function when this system is off.
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. (
page 23)
2. Press [
w
][
q
] to select “HDMI ” and press [OK].
3. Press [
w
][
q
] to select “STNBY ” and press [OK].
4. Press [
e
][
r
] to select “OFF ” and press [OK].
OFF : Standby power consumption reduced
(approx. 0.2 W)
ON : “Standby through” is activated when this system is turned off. (Normal power
consumption)
Factory setting: ON
5. Press [ RETURN] several times to select “EXIT ” and press
[OK] to nish the setting.
Note
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic sc zt1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic sc zt1

Panasonic sc zt1 Bedienungsanleitung - Deutsch - 92 seiten

Panasonic sc zt1 Bedienungsanleitung - Deutsch - 8 seiten

Panasonic sc zt1 Installationsanweisung - Englisch - 1 seiten

Panasonic sc zt1 Bedienungsanleitung - Holländisch - 100 seiten

Panasonic sc zt1 Bedienungsanleitung - Holländisch - 8 seiten

Panasonic sc zt1 Bedienungsanleitung - Dänisch - 100 seiten

Panasonic sc zt1 Bedienungsanleitung - Dänisch - 8 seiten

Panasonic sc zt1 Bedienungsanleitung - Französisch - 92 seiten

Panasonic sc zt1 Bedienungsanleitung - Französisch - 8 seiten

Panasonic sc zt1 Bedienungsanleitung - Italienisch - 92 seiten

Panasonic sc zt1 Bedienungsanleitung - Italienisch - 8 seiten

Panasonic sc zt1 Bedienungsanleitung - Spanisch - 100 seiten

Panasonic sc zt1 Bedienungsanleitung - Spanisch - 8 seiten

Panasonic sc zt1 Bedienungsanleitung - Polnisch - 100 seiten

Panasonic sc zt1 Bedienungsanleitung - Polnisch - 8 seiten

Panasonic sc zt1 Bedienungsanleitung - Schwedisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info