Bedienungsanleitung Panasonic SCAK100PC (Seite 10 von 16) (Englisch)

612657

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQT6351

Cassette deck operations

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit

will not be able to do full justice to the characteristics of these tapes.

1 Press [TAPE :].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c DECK 1 OPEN] or [c DECK 2 OPEN] and

insert the cassette.

Insert with the side to be played facing towards you and the

exposed tape facing down.

Close the holder by hand.

3 Press [TAPE :] to start playback.

To stop tape playback

Press [L/–DEMO].

To fast-forward or rewind

Press [g/REW/3] (rewind) or [4/FF/f] (fast-forward).

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

Notes

•

Tape playback is momentarily interrupted if you open the other deck.

•

Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

•

Tape slack can get caught up in the mechanism and should be

taken up before the tape is played.

•

Endless tapes can get caught up in the deck’s moving parts if used

incorrectly.

Using the built-in sound quality

You can choose one of the four types of sound quality.

HEAVY : Adds punch to rock

SOFT : For background music

CLEAR : Clarifies higher sounds

VOCAL : Adds gloss to vocals

Press [PRESET EQ] to select a setting.

Every time you press the button:

Note

You cannot use PRESET EQ and SUPER SOUND EQ together.

Cassettes

Recording

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Preparation:

Wind up the leader tape so recording can begin immediately.

1 Press [c DECK 2 OPEN] and insert the cassette to

be recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

2 Select the source to be recorded.

Radio recording:

Tune in the station. (z page 7)

CD recording:

1. Insert the CD(s) to be recorded.

Press [CD :/ J] and then [L/–DEMO].

2. Prepare the desired CD recording mode.

To record programmed tracks (z "Program play" on page 9:

steps 1–3).

To record specific CDs/Tracks (z "To listen to specific CDs

and tracks (CD Play Mode function)" on page 9: steps 1–3)

Ensure CD is stopped.

Tape-to-tape recording:

1. Press [TAPE :] and then [L/–DEMO].

2. Press [c DECK 1 OPEN] and insert the cassette you want to

record.

3 Press [a REC] to start recording.

To stop recording

Press [L/–DEMO].

HEAVY SOFT CLEAR

EQ-OFF

VOCAL

(cancelled)

•

DECK 1/2

DEMO

PLAY

MODE

L/–DEMO

PLAY MODE

You can enhance the bass and treble effect of the sound.

Press [SUPER SOUND EQ].

Remote control: Press [S.SOUND EQ].

Press the button again to cancel.

The button light goes out.

Enhancing the sound quality

SUPER

SOUND EQ

S.SOUND EQ

PRESET EQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK100PC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info