Bedienungsanleitung Panasonic SCAK220 (Seite 15 von 16) (Englisch)

612683

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Timer operations

RQT7528

Reference

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in

the chart do not solve the problem, refer to the “Customer Services Directory” on the back cover if you reside in the U.S.A., or refer to the

“Product information” on page 14 if you reside in Canada.

Reference pages are shown as black circled numbers @.

Playing discs

The display is wrong or

play won’t start.

The total number of tracks

displayed differs each time

the same disc is inserted.

Unusual sound is heard.

CD-RW cannot be read.

“VBR–” is displayed

instead of the remaining

play time.

“TAKE OUT/DISC” appears

on the display.

The disc may be upside down. 7

Wipe the disc.

Replace the disc if it is scratched, warped, or non-standard.

Condensation may have formed inside the unit due to a sudden change in temperature. Wait for about an

hour for it to clear and try again.

The disc may be scratched, or its data may be defective. Replace the disc.

The disc was incompletely formatted. Use the recording equipment to fully format the disc before recording.

The unit cannot display the remaining play time for variable bit rate (VBR) tracks.

There is a problem with the disc mechanism. (A power failure may have occurred.)

The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the tray,

close it. The unit will make the disc changing noises for a few moments and then it should operate normally.

Listening to the radio

Noise is heard.

The stereo indicator flickers

or doesn’t light.

Sound is distorted.

A beat sound is heard.

A low hum is heard during

AM broadcasts.

Use an outdoor antenna. $

Turn the TV off or separate it from the unit.

Separate the antenna from other cables and cords.

Using the cassette deck

Poor quality sound.

Recording is not possible.

Clean the heads. See below

If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzene to clean this unit.

• Before using a chemically treated cloth, read the instructions that

came with the cloth carefully.

Maintenance

For a cleaner, crisper sound

Clean the heads regularly to assure good quality playback and

recording.

Use a cleaning tape (not included).

Common Problems

Although the unit is in

standby mode, the display

lights up and changes

continuously.

No sound.

Sound stops.

Sound is unfixed, reversed or

comes from one speaker

only.

Humming heard during play.

“ERROR” is displayed.

“– –:– –” appears on the

display at standby mode.

“F61” is displayed.

Turn off the demo function. @

If you set the clock, demo function will be turned off automatically. @

Turn the volume up.

Switch off the unit, determine and correct the cause, then switch the unit on. Causes include shorting of

the positive and negative speaker wires, straining of the speakers through excessive volume or power,

and using the unit in a hot environment.

Check the speaker connections. 4

An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords away

from this unit’s cables.

Incorrect operation performed. Read the instructions and try again.

You plugged the AC power supply cord in for the first time or there was a power failure recently. Set the

time. @

Check and correct the speaker cords connection. 4

If this does not fix the problem, there is a power supply problem. Consult the dealer.

Remote control

Remote control doesn’t

work.

Check that the batteries are inserted correctly. 3

Replace the batteries if they are worn.

When there is a television set nearby

The picture on the TV

disappears or stripes

appear on the screen.

The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to

an outdoor antenna.

The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK220 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info