Bedienungsanleitung Panasonic SCAK230 (Seite 15 von 16) (Englisch)

612684

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQT7790

Specifications

1. Damage requiring service —The unit should be serviced by

qualified service personnel if:

(a)The AC power supply cord or AC adaptor has been damaged;

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change

in performance; or

(e)The unit has been dropped or the cabinet damaged.

2. Servicing —Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servicing

to authorized servicing personnel.

3. Replacement parts —When parts need replacing ensure the

servicer uses parts specified by the manufacturer or parts that

have the same characteristics as the original parts. Unauthorized

substitutes may result in fire, electric shock, or other hazards.

Product Service

Product information

For product information or assistance with product operation:

In the U.S.A., refer to “Customer Services Directory” on the

back page.

In Canada, contact the Panasonic Canada Inc. Customer Care

Centre at 905-624-5505, or visit the website (www.panasonic.ca),

or an authorized Servicentre closest to you.

SPEAKER SECTION

AK230

Type 2 way, 2 speaker system (Bass reflex)

Speaker(s)

Woofer 16 cm (6

˝) cone type

Tweeter 6 cm (2

˝) cone type

Impedance 5 Ω

Input power (IEC) 100 W (Max)

Output sound pressure level

81 dB/W (1.0 m)

Cross over frequency 4 kHz

Frequency range 35 Hz–28 kHz (–16 dB)

50 Hz–26 kHz (–10 dB)

Dimensions (WxHxD) 220 x 330 x 201 mm

˝ x 13˝ x 7

˝)

Mass 2.7 kg (6.0 lb.)

GENERAL

Power supply AC 120 V, 60 Hz

Power consumption

AK330

AK333

: 238 W

AK230

: 165 W

Dimensions (WxHxD) 250 x 330 x 341 mm

˝ x 13˝ x 13

˝)

Mass

AK330

AK333

: 7.1 kg (15.7 lb.)

AK230

: 6.9 kg (15.2 lb.)

Operating temperature range

+5 to +35 °C (+41 to +95 °F)

Operating humidity range

5 to 90 % RH (no condensation)

Power consumption in standby mode

AK330

AK333

: 0.38 W

AK230

: 0.34 W

Note:

1. Specifications are subject to change

without notice.

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by

the digital spectrum analyzer.

AK330

AK333

The labels “HIGH” and

“LOW” on the rear of the speakers refer

to High frequency and Low frequency.

AMPLIFIER SECTION

AK330

FTC output power

THD 10%, both channels driven

100 Hz–3 kHz

(Low channel) 64 W per channel (5 Ω)

3 kHz–10 kHz

(High channel) 60 W per channel (5 Ω)

Total Bi-Amp power 248 W

RMS output power

THD 10%, both channels driven

1 kHz

(Low channel) 90 W per channel (5 Ω)

10 kHz

(High channel) 90 W per channel (5 Ω)

Total Bi-Amp power 360 W

AMPLIFIER SECTION

AK333

FTC output power

THD 10%, both channels driven

100 Hz–3 kHz

(Low channel) 59 W per channel (5 Ω)

3 kHz–10 kHz

(High channel) 58 W per channel (5 Ω)

Total Bi-Amp power 234 W

RMS output power

THD 10%, both channels driven

1 kHz

(Low channel) 85 W per channel (5 Ω)

10 kHz

(High channel) 85 W per channel (5 Ω)

Total Bi-Amp power 340 W

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using a chemically treated cloth, read the instructions that

came with the cloth carefully.

Maintenance

For a cleaner, crisper sound

Clean the heads regularly to assure good quality playback and

recording.

Use a cleaning tape (not included).

4. Safety check —After repairs or service, ask the servicer to

perform safety checks to confirm that the unit is in proper working

condition.

CASSETTE DECK SECTION

Track system 4 track, 2 channel

Heads

Record/playback Solid permalloy head

Erasure Double gap ferrite head

Motor DC servo motor

Recording system AC bias 100 kHz

Erasing system AC erase 100 kHz

Tape speed 4.8 cm/s (1

ips)

Overall frequency response

(+3 dB, –6 dB at DECK OUT)

NORMAL 35 Hz–14 kHz

S/N 50 dB (A weighted)

Wow and flutter 0.18% (WRMS)

Fast forward and rewind time

Approx. 120 seconds with

C-60 cassette tape

DISC SECTION

Discs played [8 cm (3˝) or 12 cm (5˝)]

(1) CD-Audio (CD-DA)

(2) CD-R/RW (CD-DA, MP3 formatted

disc)

(3) MP3

Bit rate

MP3 32 kbps–320 kbps

Sampling frequency

MP3 32 kHz, 44.1 kHz, 48 kHz

CD 44.1 kHz

Decoding 16 bit linear

Digital filter 8 fs

D/A converter MASH (1 bit DAC)

Pickup

Wavelength 780 nm

Beam Source Semiconductor laser

Audio output (Disc)

Number of channels

2 (Stereo) (FL, FR)

SPEAKER SECTION

AK330

AK333

Type

3 way, 3 speaker system (Bass reflex)

Speaker(s)

Woofer 16 cm (6

˝) cone type

Tweeter 6 cm (2

˝) cone type

Super tweeter Piezo type

Impedance

HIGH 5 Ω

LOW 5 Ω

Input power (IEC)

HIGH 90 W (Max)

LOW 90 W (Max)

Output sound pressure level

83 dB/W (1.0 m)

Cross over frequency 2.6 kHz, 10 kHz

Frequency range 37 Hz–23 kHz (–16 dB)

44 Hz–22 kHz (–10 dB)

Dimensions (WxHxD) 240 x 330 x 230 mm

˝ x 13˝ x 9

˝)

Mass 3.2 kg (7.1 lb.)

AMPLIFIER SECTION

AK230

FTC output power

THD 10%, both channels driven

100 Hz – 10 kHz

69 W per channel (5 Ω)

Total FTC power 138 W

RMS output power

THD 10%, both channels driven

1 kHz 100 W per channel (5 Ω)

Total RMS power 200 W

FM/AM TUNER, TERMINALS SECTION

Preset station FM 15 stations

AM 15 stations

Frequency Modulation (FM)

Frequency range

87.9 – 107.9 MHz (200 kHz steps)

87.5 – 108.0 MHz (100 kHz steps)

Sensitivity 2.5 ØV (IHF)

S/N 26 dB 2.2 ØV

Antenna terminal(s) 75 Ω (unbalanced)

Amplitude Modulation (AM)

Frequency range

520 – 1710 kHz (10 kHz steps)

Sensitivity

S/N 20 dB (at 1000 kHz) 560 ØV/m

Audio performance (Amplifier)

Input sensitivity/Input impedance

Aux 250 mV, 14.7 kΩ

Phone jack

Terminal Stereo, 3.5 mm (

˝) jack

Panasonic SCAK230 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info