Bedienungsanleitung Panasonic SCAK230 (Seite 20 von 32) (Englisch, Spanisch)

612684

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT7800

(R)

(L)

To household

AC outlet

Set-up

5 AC power supply cord

3 Speakers

Placement Connection

Connect the AC power supply cord only after all other connections have been made.

Optional antenna connections (A page 10)

Preparation

Twist and pull off the vinyl tip of the antenna wires and speaker cords.

If the speaker cords do not have vinyl tips, directly connect them to the terminals.

Insertion of connector

Even when the connector is perfectly inserted, depending

on the type of inlet used, the front part of the connector

may jut out as shown in the drawing.

However there is no problem using the unit.

GCP

only

If the power plug does not fit your socket, use the power

plug adaptor (included).

Note

The included AC power supply cord is for use with this unit only. Do not use it with

other equipment.

For your reference

To save power when the unit is not to be used for a long time, unplug it from the

household AC outlet. You will need to reset some memory items after plugging in

the unit.

Connector

Appliance inlet

Approx. 6 mm

GCP

only

Voltage selector

Use a flat-head screwdriver to set

the voltage selector on the rear

panel to the appropriate position for

the area in which this system is

used.

1 FM indoor antenna

2 AM loop antenna

Stand the antenna up on its base.

Adhesive tape

Affix where reception

is best.

Note

•

Keep your speakers at least 10 mm away from the

system for proper ventilation.

•

These speakers do not have magnetic shielding. Do

not place them near televisions, personal computers

or other devices easily influenced by magnetism.

•

You cannot take the front net off the speakers.

Speakers are designed identically so that no left or

right channel orientation is necessary.

Black (–)

Red (+)

Black

Red

Use only the supplied speakers.

The combination of the main unit and speakers

provide the best sound. Using other speakers

can damage the unit and sound quality will be

negatively affected.

Notes on speaker use

•

You can damage your speakers and shorten

their useful life if you play sound at high levels

over extended periods.

•

Reduce the volume in the following cases to

avoid damage.

– When playing distorted sound.

– When adjusting the sound quality.

Connect the left

(L) side in the

same way.

VOLT ADJ

Turning the demo function on/off

DISP, –DEMO

220–240

110–127

Caution

•

Use the speakers only with the recommended system. Failure

to do so may lead to damage to the amplifier and/or the

speakers, and may result in the risk of fire. Consult a qualified

service person if damage has occurred or if you experience

a sudden change in performance.

•

Do not attach these speakers to walls or ceilings.

When the unit is first plugged in, a demonstration of its functions may

be shown on the display.

If the demo setting is off, you can show a demonstration by selecting

“DEMO ON”.

Press and hold [DISP, –DEMO].

The display changes each time the button is held down.

NO DEMO (off)

DEMO ON (on)

While in the standby mode, select “NO DEMO” to reduce power

consumption.

Note

DEMO function cannot be turned on when Dimmer is on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK230 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info