612781
33
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Operations
SQT0935
33
Operation with this system
Preparation
Turn this system and SC-ALL2 on.
1 Press [SETUP] on the remote control
repeatedly to select “REAR PAIRING”.
2Press [4][3] on the remote control to
select “YES” and then press [OK].
This system enters the pairing mode and “REAR1
PAIRING” is displayed on the display of the main unit.
3 Start the pairing mode on SC-ALL2.
Refer to the operating instructions for SC-ALL2.
When pairing with the first speaker finishes, pairing
starts with the second speaker and “REAR2
PAIRING” is displayed on the display of the main
unit.
Make the left and right surround speaker settings on
SC-ALL2.
When pairing with both speakers finishes,
“PAIRED” is displayed on the display of the
main unit.
When pairing is successful, “REAR SPEAKER”
(> 30) comes “ON” automatically and the output
setting changes to 5.1 ch.
If you try to set left and right surround speakers to
the same channel on SC-ALL2, pairing fails and
“NOT COMPLETED” is displayed on the display of
the main unit. Repeat the procedure from the
beginning if this occurs.
The pairing mode is cancelled after about 120 seconds
elapses. You can also press [Í/I] to cancel it.
You cannot cancel pairing on this system. Cancel pairing
on SC-ALL2.
The power on paired SC-ALL2 is linked to this system.
They remain linked even when the “REAR SPEAKER”
(> 30) is “OFF”.
There is no way of adjusting delay time with this system.
If one of the speakers fails to pair, repeat the procedure
from the beginning. When you do so, “REAR PAIRING” is
displayed during pairing and “PAIRED” is displayed when
pairing is successful.
You can adjust the output level of the rear surround
speakers. (> 31, “REAR LEVEL”)
Linked operations
with the TV
(VIERA Link “HDAVI
Control
TM
”)
Preparation
1 Confirm that the HDMI connection has been
made. (> 9, 10, 11)
2 Set the “HDAVI Control” operations on the
connected equipment (e.g., TV).
3 For the optimal “HDAVI Control” operations
change the following settings on the
connected TV
§1
.
Set the default speaker settings to this system.
§2
Set the speaker selection settings to this system.
4 Turn on all “HDAVI Control” compatible
equipment and select the TV’s input for this
system so that the “HDAVI Control” function
works properly.
5 If a device is connected to the HDMI AV IN
terminal, start play to check that the picture
is displayed on the TV correctly.
When the connection or settings are
changed, repeat this procedure.
§1 The availability and function of the settings may vary
depending on the TV. Refer to the operating
instructions for the TV for details.
§2 If the TV has a default speaker setting within the VIERA
Link setting items, choosing this system as the default
speaker will automatically change the speaker selection
to this system.
What is VIERA Link “HDAVI
Control”?
VIERA Link “HDAVI Control” is a convenient
function that offers linked operations of this
system, and a Panasonic TV (VIERA) under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable. See the
operating instructions for connected
equipment for operational details.
SC-ALL70T-SQT0935.book 33 ページ 2015年4月28日 火曜日 午前10時5分
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SCALL70TGN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic SCALL70TGN

Panasonic SCALL70TGN Kurzanleitung - Englisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info